Table of Contents
Advertisement
○ Installation procedure and method (based on left driver's seat)
1. Open the door about a second
3.
Articulated lever (A), height adjustment lever (B) and auxiliary
shade cover (C) set it to fit the window frame so that the left and
right columns are vertical. Tighten.
- If the shape of the door trim seat where the shoes are placed
may be unstable, you put the enclosed gel pad under the base,
tighten it.
- Matches with the door weather strip end when adjusting the
auxiliary shade cover length
auxiliary shade cover (C))
Articulated lever(A)
Height adjustment lever(B)
2.
Attach the magnet on the top of the product to the frame on
the upper after adjust the stand so that it is 1 cm from the
end of the door, and then close the door.
(※ Note: If the upper frame is covered with plastic cover,
enclosed steel plate product magnet position stick to
the top frame exactly in two places)
4. Tap or push and pull the product with a little force and
make sure there are no breaks.
1cm
Advertisement
Table of Contents
