Download Print this page

Kvarta DVB Streamer Quick Start

Advertisement

Quick Links

DVB Streamer Quick Start Guide
1. Unpacking
Check that all these accessories are present:
1 power supply
1 straight ethernet cable
1 quick start notice
2. Connecting to the embedded Web site
password (admin/admin). The
embedded web site is
3. Configuring the DVB settings
On the embedded web site home page, click "DVB -> Configuration":
www.kvarta.net
DVB Streamer

Quick Start

1.
Connect the Ethernet cable between the RJ45 and the network..
2.
Default IP: 192.168.2.3 (admin/admin)
NOTE: Your computer should be in the same network.
3.
Open a
Explorer,
the device
the default
Web browser (Internet
Mozilla...) and enter
IP address. Login with
username and
home page of the
displayed:

Advertisement

loading
Need help?

Need help?

Do you have a question about the DVB Streamer and is the answer not in the manual?

Questions and answers

Summary of Contents for Kvarta DVB Streamer

  • Page 1: Quick Start

    DVB Streamer Quick Start Guide DVB Streamer Quick Start 1. Unpacking Check that all these accessories are present: 1 power supply 1 straight ethernet cable 1 quick start notice 2. Connecting to the embedded Web site Connect the Ethernet cable between the RJ45 and the network..
  • Page 2 DVB Streamer Quick Start Guide 4. Look at current DVB status for RF parameters  On the embedded web site go to “DVB” > “Status”. If everything is OK the Demodulator should be locked as in the picture below 5. Configure the IP Stream ...