Table of Contents
Advertisement
Symptom
The player does not
respond to the remote
control
Distorted or B/W
picture with DVD
Player does not respond
to all operating commands
during playback
Player feels warm
Display goes dimmer when
AC is unplugged
No sound (PAC132)
No video (PAC132)
TROUBLESHOOTING
Remedy
– Aim the remote control directly at the
sensor on the front of the player. Avoid all
obstacles that may interfere with the signal
path. Inspect or replace the batteries.
– Use only discs formatted according to the
TV-set used (PAL/NTSC).
– Operations are not permitted by the disc.
– Refer to the instructions in the disc inlay.
– When the player is in use for a long
period of time, the surface will be heated.
This is normal.
– The unit is saving power to ensure longer
playtime with battery. It is normal.
Adjust the brightness using the rotary bright-
ness control.
– Make sure that the LCD screen is switched on
and is in the correct video mode.
– Make sure that your system connection is
properly connected.
– Make sure the video source is correct.
– Make sure all the connected devices are
switched on.
– Make sure that the system is properly con-
nected.
– Make sure that video playback has already
started on the primary device, such as DVD
player, camcorder.
– Make sure that the video out function on the
primary device has been activated.
Advertisement
Table of Contents
