Advertisement
Procedure:
1. Connect a blank (formatted) USB storage device to your computer, and then locate and copy the
".scd" file onto the USB storage device.
2. Start the vehicle engine.
3. Connect the USB storage device to the USB input on your unit.
4. If AV Source is On, Press and hold SRC/OFF to set the unit Source OFF.
5. Press the M.C. (multi-control) to display the Initial menu.
6. Turn M.C. dial to select "S/W UPDATE", then press to confirm.
7. Select the "SYSTEM UPDATE" item for updating the unit to the lastest software.
8. The "CHECK FILE" screen appears.
-> If it shows "ERROR" on the display, Try the following
"FILE ERROR" Confirm the software is correct, then restart Version up or change a new USB memory.
"ERR->RETRY" Do not turn off the power! Unit will retry Version up automatically.
Advertisement
