Thank you for purchasing this product For optimum performance and safety, please read these instructions caref- ully before connecting, operating or adjusting this product. Please keep this manual for future reference. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shook, lighting strikes, etc.
1. Introduction The 8x8 HDMI Matrix supports the transmission of video (up to 4K2K@60Hz YUV 4:4:4, 18Gbps, HDCP 2.2) and multi-channel digital audio from 8 HDMI sources to 8 HDMI displays. Audio de-embedded is supported from 8 HDMI output ports. Control is via button, IR, RS-232, LAN and Web GUI. 2.
5. Operation Controls and Functions 5.1 Front Panel Number Name Function descriptions Display system status including input/output status, OLED diaplay EDID management and matrix IP address. IR receiver window, it receives IR remote control IR Window signal to control this device. After system power up, the OLED default displays the mappig of the input and output.
Page 6
‘Right’ button to confirm this operation. 4. Recall Preset: Press the ‘Right’ button to recall previous preset, press ‘Up’ or ‘Down’ button to select preset you want, press the ‘Right’ button to confirm this operation. 5. View IP: Press the ‘Right’ button to check IP address and DHCP status.
Copy HDMI Out F Copy HDMI Out G Copy HDMI Out H 5.2 Rear Panel AUDIO OUTPUT OUTPUT Number Name Function descriptions Connect to the HDMI input source devices such as HDMI INPUT a DVD player or Set-top Box. HDMI OUTPUT Connect to the HDMI output source devices such as a TV player or monitor.
7. Remote Control : Power on or set it to standby status. Input 1/2/3/4/5/6/7/8: Press these button to select input signal source. Input : Press these button to select the last or the next input signal source. Output 1/2/3/4/5/6/7/8: Press these button to select output signal source.
Page 9
The first way: The Matrix gets IP address via PC Controller. Firstly, opening Matrix PC Controller software, as following picture. Selecting the “TCP Control Mode” port, then click the “Search” button. At this moment, you can get current IP address. You can set the IP address to your PC/laptop/mobile Internet Explorer and click “Search”...
Page 10
The Web GUI likes below: General page ① Click this button to check current the Matrix connection status. ② Display currently the Matrix input and output port status. The “yes” have connected input or output source and “no” represent not connection. ③...
Page 11
Matrix page ① Select to the OUTPUT A input source. (Tab ① to other output port have similar function.) EDID page ① Select EDID mode to input source, then click “Set” button. ② Copy EDID from output display to input source, then click “Set” button. ③...
Page 12
Network page ① Network Configuration DHCP switch, Net Status button: Obtian the network configuration information, including IP address, Subnet, Gate and Mac address, then click “Save Changes” button. ② Status Log: Display the Net configuration information. ③ Clear button: Click this button to clear the Status Log information. Upgrade page ①...