Advertisement
10. When the video capture is over, you can click the "Exit" button to close
the software.
Attention: The all instruction of the software is only about video capture settings
at the above content. You can brower other related settings function.
7. Device source logic
① Insert Interface Logic: The video capture will display the last insert interface
signal.
② Pull out Interface Logic: When pull out current interface signal, the signal
displays priority order about SDI->HDMI->DVI->VGA(YPBPR/AV).
③ Power on/off Logic: Before power off, displaying the last dispaly signal.
After power off, if the signal has pulled out, the signal displays priority order
pg. 10
Advertisement
