Thank you for purchasing this product For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc.
1. Introduction This product has a superior performance, superior compatibility, easy to carry, simple installation and many other features. It can capture HDMI, DVI (VGA, YPbPr, AV) and SDI input and output signal, video resolution the maximum up to 1920×1200. It compatibles Windows, Linux, Mac OS X operating system and USB3.0 interface.
4. Specifications Technical Host port 1×USB [USB Type A, USB3.0 — 300~350MB/s] Input ports 1×DVI IN [DVI-I, Attention: This is a common interface, it can also connect VGA/YPbPr/ AV source input though converter joint.] 1×HDMI IN [19-pin female] 1×SDI IN [BNC] 1×AUDIO IN [3.5mm Stereo Mini-jack] HDMI input 480i, 480p, 576i, 576p, 720p50/60, 1080i50/60,...
AUDIO IN Analog stereo audio input. (When the input source is DVI/VGA/YPbPr/AV, the USB voice capture from external AUDIO input.) Action LED This LED will illuminate when the device captures video normally. Power LED This LED will illuminate when the device has connected PC’s or NoteBook’s USB port.
Page 7
5. In the Setting page, you can select “Audio” option. In the page, you need select “Sample Rate” and the “Mic/Auxiliary Audio Device” to select pg. 7...
Page 8
“USB3.0 Capture Audio”. Then click “Apply” button and “OK” button. → 6. Use your mouse to click the Setting icon, you need select “Advanced Audio Properties” option. In the Advanced Audio Properties page, you need select “Monitor and Output” option. Then click “Close” button. →...
Page 9
→ 8. Open Setting page, you can select “Output” option. In the page, you can browse recording path for capture video, select the recording quality, select recording format etc. Then click “Apply” button and “OK” button. → 9. When you have finished all settings, you need click the “Start Recording” button to starting video capture.
10. When the video capture is over, you can click the “Exit” button to close the software. Attention: The all instruction of the software is only about video capture settings at the above content. You can brower other related settings function. 7.
about SDI->HDMI->DVI->VGA(YPBPR/AV). ④ Sound logic: When the HDIM/SDI is input source, the sound is built-in audio. When the DVI/VGA (YPbPr, AV) is input source, the sound is from external analog stereo audio input. 8. Application Example pg. 11...