Table of Contents
  • Fonctions Et Caractéristiques
  • Caractéristiques Techniques
  • Conditions D'utilisation
  • Interface Ethernet
  • Dépannage
  • Funktionen und Merkmale
  • Vorbereitende Schritte
  • Spezifikationen
  • Fehlerbehebung
  • Contenuto Della Confezione
  • Funzioni E Caratteristiche
  • Operazioni Preliminari
  • Installazione
  • Indicatori Luminosi
  • Istruzioni DI Montaggio
  • Specifiche Elettriche
  • Interfaccia Ethernet
  • Risoluzione Dei Problemi
  • Contenido del Paquete
  • Funciones y Características
  • Pasos Preliminares
  • Instalación
  • Especificaciones
  • Solución de Problemas

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Quick Links

INSTALLATION GUIDE
AXIS T8122 DC 30W Midspan

Advertisement

Table of Contents
loading

Summary of Contents for Axis 8122 DC 30W Midspan

  • Page 1 INSTALLATION GUIDE AXIS T8122 DC 30W Midspan...
  • Page 2: Safety Information

    • Find answers to resolved problems in the FAQ minimum current capacity of 3 amps. database • The DC power source must be near the AXIS • Search by product, category, or phrases Midspan and easily accessible. You can remove DC power from the AXIS Midspan by •...
  • Page 3 Business users should contact the product supplier for information on how to dispose off this product correctly. This product should not be mixed with other commercial waste. For more information, visit www.axis.com/techsup/...
  • Page 5 Installation guide (this document) Warranty document Functions and features The AXIS T8122 DC 30W Midspan injects 52V DC power into the spare pairs of the Ethernet cabling. It complies with both IEEE802.3af and IEEE802.3at standards. These power levels allow a new range of Ethernet-based applications such as PTZ Cameras to use the Midspan.
  • Page 6: Installation

    Page 6 AXIS T8122 DC 30W Midspan Installation Connect the AXIS T8122 to a DC outlet (12-24V DC / 45-57V DC). Connect the unit Data In jack (In) to your remote Ethernet network switch using a shielded Ethernet cable. Connect the Data & Power Out jack (Out) to your Axis splitter or camera, using a shielded Ethernet cable.
  • Page 7 AXIS T8122 DC 30W Midspan Page 7 Before the unit is powered on, the power switch has to be Power switch - set in the correct position. • Position 1 (30W): Use this setting if an 802.3at PoE camera is con- nected to the midspan and the power source can deliver a minimum of 40W.
  • Page 8: Mounting Instructions

    AXIS T8122 DC 30W Midspan Mounting instructions The AXIS T8122 may be wall or bench mounted using the rear side holes. It can also be mounted on a DIN rail. Note the following before mounting the AXIS T8122 to a fixed location: •...
  • Page 9: Specifications

    AXIS T8122 DC 30W Midspan Page 9 Specifications Environmental Mode Temperature Humidity Operating -20 to 65°C max 95% (non-condensing) -4 to 149°F Storage -40 to 74°C -24 to 158°F Electrical DC Input voltage 1 12 to 24 V DC (max. 40 W) DC Input voltage 2 45 to 57 V DC (max.
  • Page 10: Ethernet Interface

    Page 10 AXIS T8122 DC 30W Midspan Maximum cable length between network switch and powered device Max cable length between network switch and powered device in meters Cat5e/6 Cat5 Input voltage When the unit is powered through the 12-24V DC input, the maximum length of network cable is: 70 m @ Cat5 and 100 m @ Cat5e/6.
  • Page 11: Troubleshooting

    AXIS T8122 DC 30W Midspan Page 11 Troubleshooting Symptom Corrective steps Midspan does Verify that an approved power cable is used. not power up Verify that the voltage at the power inlet is between 12-24V DC for Input voltage 1 and between 45-57V DC for Input voltage 2.
  • Page 12 Page 12 AXIS T8122 DC 30W Midspan The end device Verify that the port indicator on the front panel is continuously lit. operates, but If an external PoE device is in use, replace it with a there is no good PoE device.
  • Page 13: Fonctions Et Caractéristiques

    Étapes préliminaires • Vérifiez que votre AXIS T8122 est raccordé à un câble CC en bon état de fonctionnement et correctement mis à la terre. • Vérifiez que le câble Ethernet de sortie est branché sur le port de données et d'alimentation de sortie.
  • Page 14 Page 14 Injecteur AXIS T8122 DC 30W Installation Branchez votre AXIS T8122 sur une prise CC (12-24 V CC/45- 57 V CC). Branchez le connecteur de données d'entrée (entrée) au commutateur réseau Ethernet distant à l'aide d'un câble Ethernet blindé.
  • Page 15 Injecteur AXIS T8122 DC 30W Page 15 Avant d'allumer l'unité, vous devez mettre le bouton Interrupteur - d'alimentation sur la bonne position. • Position 1 (30 W) : utilisez ce réglage si une caméra 802.3at PoE est reliée à l'injecteur et si la source d'alimentation peut fournir au moins 40 W.
  • Page 16 Page 16 Injecteur AXIS T8122 DC 30W Instructions de montage Votre AXIS T8122 peut être fixé au mur ou monté sur banc à l'aide des trous situés au dos de l'appareil. Il peut également être monté sur un rail DIN.
  • Page 17: Caractéristiques Techniques

    Injecteur AXIS T8122 DC 30W Page 17 Caractéristiques techniques Conditions d'utilisation Mode Température Humidité En fonctionnement -20 à 65 °C 95 % max. sans -4 à 149 °F condensation Stockage -40 à 74 °C -24 à 158 °F Électrique Tension 12 à...
  • Page 18: Interface Ethernet

    Page 18 Injecteur AXIS T8122 DC 30W Longueur de câble maximum entre le commutateur réseau et le dispositif sous tension Longueur de câble maximum entre le commutateur réseau et le dispositif sous tension en mètres Cat5e/6 Cat5 Tension d'entrée Lorsque l'unité est alimentée par une entrée 12-24 V CC, la longueur maximum du câble réseau est : 70 m à...
  • Page 19: Dépannage

    Injecteur AXIS T8122 DC 30W Page 19 Dépannage Symptôme Correction L'injecteur ne se Vérifiez qu'un câble d'alimentation approuvé est met pas sous utilisé. tension. Vérifiez que la tension à l'arrivée se situe entre 12 et 24 V CC pour la tension d'entrée 1 et entre 45 et 57 V CC pour la tension d'entrée 2.
  • Page 20 Page 20 Injecteur AXIS T8122 DC 30W Le périphérique Vérifiez que l'indicateur de port à l'avant de l'appareil est allumé en continu. final Si un dispositif PoE externe est utilisé, remplacez-le par fonctionne, un dispositif PoE que vous savez en bon état de mais il n'y a fonctionnement.
  • Page 21: Funktionen Und Merkmale

    Midspan in zahlreichen neuen Ethernet-basierten Anwendungen, z. B. PTZ-Kameras eingesetzt werden. Vorbereitende Schritte • Stellen Sie sicher, dass der AXIS Midspan über ein einsatzbereites Netzkabel mit einer entsprechenden Erdung mit Gleichstrom versorgt wird. • Stellen Sie sicher, dass das ausgehende Ethernet-Kabel am Daten- und Stromausgang angeschlossen ist.
  • Page 22 Seite 22 AXIS T8122 DC 30W Midspan Installation Schließen Sie den AXIS T8122 an eine Netzsteckdose (12-24 V Gleichstrom / 45-57 V Gleichstrom) an. Verbinden Sie den Dateneingang (Buchse „Data In“) des Geräts über ein abgeschirmtes Ethernet-Kabel mit dem Netzwerk-Switch des Remote-Ethernet-Netzwerks.
  • Page 23 AXIS T8122 DC 30W Midspan Seite 23 Bevor Sie das Gerät einschalten, schieben Sie zunächst den Netzschalter - Netzschalter in die richtige Position. • Position 1 (30 W): Verwenden Sie diese Einstellung, wenn Sie PoE- Kameras gemäß 802.3at an den Midspan anschließen und die Stromquelle mindestens 40 W liefert.
  • Page 24 Der Midspan ist kein Repeater und verstärkt damit nicht das Datensignal der Ethernet-Verbindung. • Verwenden Sie, falls nötig, einen Splitter; vergewissern Sie sich jedoch, dass der Splitter in der Nähe des Axis Videoprodukts und nicht am Midspan sitzt. • Es ist kein Netzschalter vorgesehen; schließen Sie den AXIS T8122 einfach an eine Netzsteckdose (Gleichstrom) an.
  • Page 25: Spezifikationen

    AXIS T8122 DC 30W Midspan Seite 25 Spezifikationen Umgebungsbedingungen Modus Temperatur Luftfeuchtigkeit Betrieb -20 bis 65°C max. 95 % (nicht -4 bis 149°F kondensierend) Lagerung -40 bis 74°C -24 bis 158°F Elektrisch Netzeingangsspannung 12 bis 24 V Gleichstrom (max. 40 W) 45 bis 57 V Gleichstrom (max.
  • Page 26 Seite 26 AXIS T8122 DC 30W Midspan Max. Kabellänge für die Verbindung zwischen dem Netzwerk-Switch und dem mit Strom zu versorgenden Gerät Max. Kabellänge zwischen Netzwerk-Switch und mit Strom zu versorgenden Gerät in Meter Cat5e/6 Cat5 Eingangsspannung Wenn die Stromversorgung des Geräts über den Netzeingang mit 12-24 V Gleichstrom erfolgt, sind folgende max.
  • Page 27: Fehlerbehebung

    AXIS T8122 DC 30W Midspan Seite 27 Ethernet-Schnittstelle Eingang (Data In): Abgeschirmtes RJ-45 EIA 568A und 568B Ausgang (Data & Abgeschirmtes RJ-45 EIA 568A und 568B Power out): Verkabelung Datenbereitstellung über Leitungspaare 1/2 und 3/6 bei 10/100 Ethernet Stromversorgung über ungenutzte Leitungspaare 4/5...
  • Page 28 Seite 28 AXIS T8122 DC 30W Midspan Eine Anschlussanzeige Der Midspan hat kein zu versorgendes Gerät leuchtet nicht, und das zu erkannt und der Anschluss ist nicht aktiviert. versorgende Gerät Prüfen Sie, ob das zu versorgende Gerät für den funktioniert nicht PoE-Betrieb geeignet ist.
  • Page 29 AXIS T8122 DC 30W Midspan Seite 29 Das Endgerät Prüfen Sie, ob die Anschlussanzeige an der Vorderseite ununterbrochen leuchtet. funktioniert, aber es Falls ein externes PoE-Gerät verwendet wird, besteht keine ersetzen Sie es durch ein Gerät, von dem Sie Datenverbindung wissen, dass es funktioniert.
  • Page 31: Contenuto Della Confezione

    Guida all’installazione (questo documento) Garanzia Funzioni e caratteristiche Il Midspan 30W AXIS T8122 DC invia corrente a 52V CC nei doppini di riserva dei cablaggi Ethernet. È compatibile con gli standard IEEE802.3af e IEEE802.3at. Questi livelli di alimentazione permettono l'utilizzo del Midspan da parte di una nuova gamma di applicazioni basate su Ethernet, come le telecamere PTZ.
  • Page 32: Installazione

    Pagina 32 Midspan 30W AXIS T8122 DC Installazione Connettere il prodotto AXIS T8122 a una presa CC (12-24V CC / 45- 57V CC). Collegare il jack Ingresso dati (In) allo switch di rete Ethernet remoto utilizzando un cavo Ethernet schermato.
  • Page 33: Indicatori Luminosi

    Midspan 30W AXIS T8122 DC Pagina 33 Prima di accendere l'unità, il selettore di potenza Selettore di potenza - deve essere impostato nella posizione corretta. • Posizione 1 (30W): Usare questa impostazione se al midspan è collegata una telecamera PoE 802.3at e la sorgente di alimentazione può...
  • Page 34: Istruzioni Di Montaggio

    Midspan 30W AXIS T8122 DC Istruzioni di montaggio Il prodotto AXIS T8122 può essere montato a muro o su un piano tramite i fori sul retro. Può essere montato anche su una barra DIN. Prima di montare il prodotto AXIS T8122 in un'ubicazione fissa, prendere nota di quanto segue: •...
  • Page 35: Specifiche Elettriche

    Midspan 30W AXIS T8122 DC Pagina 35 Specifiche Specifiche ambientali Modalità Temperatura Umidità Di esercizio -20 - 65°C max. 95% (senza condensa) -4 - 149 °F Stoccaggio -40 - 74°C -24 - 158 °F Specifiche elettriche Tensione CC 12 - 24 V CC (max. 40 W) ingresso 1 45 - 57 V CC (max.
  • Page 36: Interfaccia Ethernet

    Pagina 36 Midspan 30W AXIS T8122 DC Lunghezza massima del cavo tra lo switch di rete e il dispositivo alimentato Max lunghezza cavo fra lo switch di rete e il dispositivo alimentato in metri Cat5e/6 Cat5 Tensione in ingresso Quando l'unità è alimentata attraverso l'ingresso a 12-24V CC, la lunghezza massima del cavo di rete è: 70 m per Cat5 e 100 m per Cat5e/...
  • Page 37: Risoluzione Dei Problemi

    Midspan 30W AXIS T8122 DC Pagina 37 Risoluzione dei problemi Sintomo Azione correttiva Il midspan non si Verificare che il cavo di alimentazione utilizzato sia di accende tipo approvato. Verificare che la tensione di alimentazione in ingresso sia compresa tra 12 e 24V CC per la tensione in...
  • Page 38 Pagina 38 Midspan 30W AXIS T8122 DC Il dispositivo Verificare che l'indicatore luminoso della porta sul pannello anteriore sia acceso fisso. terminale Se è in uso un dispositivo PoE esterno, sostituirlo con funziona, ma i un dispositivo PoE funzionante. dati non...
  • Page 39: Contenido Del Paquete

    Guía de instalación (este documento) Documento de garantía Funciones y características La unidad AXIS T8122 CC 30 W Midspan transmite alimentación CC de 52 V en los pares de reserva del cableado Ethernet. Cumple con los estándares IEEE802.3af y IEEE802.3at. Estos niveles de alimentación permiten que una nueva gama de aplicaciones basadas en Ethernet tales como cámaras PTZ utilicen la unidad Midspan.
  • Page 40: Instalación

    Página 40 AXIS T8122 CC 30 W Midspan Instalación Conecte la unidad AXIS T8122 a una toma de CC (12-24 V CC / 45- 57 V CC). Conecte la toma Data In (entrada de datos) a su switch remoto de red Ethernet utilizando un cable Ethernet blindado.
  • Page 41 AXIS T8122 CC 30 W Midspan Página 41 Antes de encender la unidad, el interruptor Interruptor de alimentación - de encendido debe estar en la posición correcta. • Posición 1 (30 W): Utilice esta configuración si una cámara 802.3at PoE está conectada a la unidad Midspan y la fuente de alimentación puede suministrar un mínimo de 40 W.
  • Page 42 Página 42 AXIS T8122 CC 30 W Midspan Instrucciones de montaje La unidad AXIS T8122 puede montarse en la pared o en un bastidor usando los orificios de la parte posterior. También se puede montar en un riel DIN. Tenga en cuenta lo siguiente antes de instalar la unidad AXIS T8122 en un lugar fijo: •...
  • Page 43 Para montar: Coloque dos tornillos verticalmente a una distancia de 65 mm en la pared o estante. Alinee las dos ranuras de montaje de la unidad AXIS T8122 para capturar los tornillos de superficie 6 a 7 mm máx. 2,5 mm...
  • Page 44: Especificaciones

    Página 44 AXIS T8122 CC 30 W Midspan Especificaciones Ambientales Modo Temperatura Humedad En funcionamiento -20 a 65 °C máx 95% (sin condensación) -4 a 149 °F En almacenamiento -40 a 74 °C -24 a 158 °F Eléctricas Tensión de entrada 12 a 24 V CC (máx.
  • Page 45 AXIS T8122 CC 30 W Midspan Página 45 Longitud máxima del cable entre el switch de red y el dispositivo que recibe alimentación Longitud máxima del cable entre el switch de red y el dispositivo que recibe alimentación en metros...
  • Page 46: Solución De Problemas

    Página 46 AXIS T8122 CC 30 W Midspan ¡PRECAUCIÓN! El pin de toma de tierra (GND) del contacto de 45-57 V CC tiene aislamiento; NO lo conecte a la tierra GND del conector RJ45. Solución de problemas Síntoma Pasos correctivos La unidad Compruebe que está...
  • Page 47 AXIS T8122 CC 30 W Midspan Página 47 El dispositivo Compruebe que el indicador de puerto del panel delantero está iluminado de forma permanente. final funciona, Si hay un dispositivo PoE externo conectado, pero no hay sustitúyalo por otro que sepa que funciona.
  • Page 50 Installation Guide Ver.2.0 AXIS T8122 DC 30W Midspan Printed: February 2011 © Axis Communications AB, 2010-2011 Part No. 41864...

Table of Contents