Clas Ohlson LR-008 Manual

Lint Remover
Art.no 44-3136 Model LR-008
Please read the entire instruction manual before using
the product and then save it for future reference.
We reserve the right for any errors in text or images
and any necessary changes made to technical data.
In the event of technical problems or other queries,
please contact our Customer Services.
Safety
• Never use the product for anything other than its
intended use.
• Do not place the product where there is a risk of it
falling into water or other types of liquid.
• Never use the product if it is in any way damaged or
malfunctioning.
• Keep the product away from heat sources.
• The product is intended for domestic use only.
• Never let children play with the product.
• Never mix old and new batteries. Never mix
rechargeable and non-rechargeable batteries.
• Remove the batteries from the product if it is not to
be used for an extended period.
Responsible disposal
This symbol indicates that this product should
not be disposed of with general household
waste. This applies throughout the entire EU. In
order to prevent any harm to the environment
or health hazards caused by incorrect waste
disposal, the product must be handed in for
recycling so that the material can be disposed
of in a responsible manner. When recycling your product,
take it to your local collection facility or contact the place of
purchase. They will ensure that the product is disposed of
in an environmentally sound manner.
GREAT BRITAIN customer service tel 020 8247 9300 e-mail customerservice@clasohlson.co.uk
internet www.clasohlson.co.uk postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
Product description
Information
The product removes pilling and lint from fabrics.
A. Shaver head
A
B. On/off
C. Battery cover
D. Lint collector
E
E. Protective cap
D
Batteries
1. Slide the battery cover (C) downwards.
2. Open the battery cover and insert 2 × AA/LR6
batteries (sold separately).
Note: Refer to the markings in the battery holder to
ensure correct polarity.
3. Refit the battery cover.
Instructions for use
1. Remove the protective cap (E).
2. Slide the on/off switch (B) up to turn it on.
3. Brush the shaver head (A) lightly back and forth across
the surface of the fabric. Do not apply a lot of pressure.
4. Silde the on/off button to turn it off.
5. Brush the shaver head clean using the included brush.
B
6. Push the lint collector (D) downwards. Remove it and
empty it of lint and fabric pills.
7. Refit the lint collector.
8. Refit the protective cap.
C
Important:
• This product is not suitable for delicate fabrics/clothing.
• Use only on smooth fabrics.
Care and maintenance
Clean the product using a soft, dry cloth. Never use
solvents or corrosive cleaning products.
Specifications
Batteries 2 × AA/LR6 (sold separately)
Weight 98 g (excl. batteries)