Table of Contents
Advertisement
ENGLISH
FINE DETAILING, CONTOURING AND EDGING
1.
Fit the desired blade (without a comb) in whichever orientation that gives the best
access.
2.
Start with the blades resting lightly against your skin, use motions towards edge of
beard line to trim to desired locations in facial area.
3.
Shape as desired.
CARE FOR YOUR TRIMMER
•
To ensure long lasting performance clean after each use.
•
The easiest and most hygienic way to clean the appliance is by rinsing the appliance
head under the tap after use while the blades are running.
•
To keep the unit in optimal condition we recommend re-oiling the blades after
cleaning.
•
Place a few drops of cutter or sewing machine oil onto the blades. Wipe off excess oil.
BATTERY REMOVAL
We strongly recommend that a professional removes the rechargeable battery. Parts of
the shaver case, and tools have sharp edges and may cause injury if not handled correctly.
•
The rechargeable battery must be removed from the appliance before it is scrapped.
•
Disconnect the charging adapter before removing the battery.
1.
Turn the unit on and discharge the remaining power.
2.
Remove any attachments.
3.
Unscrew the 2 screws on the top side.
4.
Pry off the top decorative panel.
5.
Unscrew the 2 screws under the panel and take off the top housing.
6.
Take out the battery and printed circuit board assembly.
7.
Disconnect he battery from the circuit board.
•
Used batteries must be removed from the appliance and disposed of at an appropriate
official recycling/collection point.
•
Do not attempt to operate the shaver once you have opened it.
6
Advertisement
Table of Contents
