Using The Airflow Adapter; To Inflate Or Blow Air; Cleaning The Attachments; Using The Cushion Bag - Rexair Rainbow SRX Owner's Manual

Proper Use and Care

Using the Airflow Adapter...

The Rainbow Airflow Adapter reduces air noise through the air inlet
opening. It is recommended that the adapter be used when the
Rainbow is used as a blower or inflator. Simply snap the Airflow
Adapter into the air inlet opening before using the Rainbow as a
blower or inflator.

To inflate or blow air...

Use the inflator tool. The Rainbow inflator tool works great for
quickly inflating air mattresses, beach balls and other inflatable toys.
WARNING:
!
place. If not, it will be blown forcefully from the tool body.
INSTRUCTIONS:
1. Remove the rear exhaust panel on the Rainbow.
2. Attach Rainbow hose to the rear exhaust opening.
3. Set Airflow Control Setting on trigger to FULL POWER.
4. Attach inflator tool to hose handle.
5. Carefully insert the inflator pin into the inflator stem of the
object to be inflated.
6. Turn Rainbow switch to HIGH.
9 |
R A I N B O W S R X
Be sure inflator pin is properly locked in
CAUTION:
!
Always clean attachments before using on fabrics. To avoid abrasions to
delicate surfaces, keep the dusting brush bristles clean.
CAUTION:
!
Do not use attachments to clean flat-screen televisions or computer screens.

Cleaning the attachments...

The floor and wall brush, dusting brush and upholstery tool can
be whisked clean with the open end of the Rainbow hose while
the Rainbow is running; or remove attachment and clean in
warm, soapy water. Allow to dry before replacing. If bristles wear
out or become damaged, contact your local Authorized Rainbow
Distributor for replacement.

Using the Cushion Bag

This handy plastic bag removes stale, dusty air from cushions
and pillows and is sized to fit even your largest cushions. Begin
by placing a cushion in the bag. With the upholstery tool attached
to the end of the hose handle wand, hold the cushion bag tightly
in place around the wand, turn on the Rainbow and watch as
stale, dusty air is sucked out. Without letting go of the bag at the
wand, disconnect the hose from the front of the Rainbow and
attach to the Rainbow's exhaust air opening. Your cushion is now
being "fluffed" with clean, water-washed air.