Progressive - Turning On/Off; Picture Setting - Philips DVP3010/02 User Manual

Progressive - turning on/off

In the progressive scan mode, you can
enjoy the high quality picture with less
flickers. It only works when you have
connected the DVD player's Y Pb Pr jacks
to your TV that supports the progressive
video input. Otherwise, the a distorted
picture will appear on the TV. For proper
progressive scan set up, see page 16.
1
In 'VIDEO SETUP PAGE', press 3 4 to
highlight {PROGRESSIVE}, then press 2.
OFF
To disable Progressive Scan function.
ON
To enable Progressive Scan function.
2
Press 3 4 to select a setting, then press
OK to confirm your selection.
➜
Follow the instructions shown on the
TV to confirm the selection (if any).
➜
If a distorted picture appears on the TV
screen, wait for 15 seconds for auto
recovery.
To return to the previous menu, press 1.
TIPS:
To remove the menu, press
01-39 DVP3010_EU_02A_2
DVD Setup Menu Options

Picture Setting

This DVD Player provides three
predefined sets of picture colour settings
and one personal setting which you can
define yourself.
1
In 'VIDEO SETUP PAGE', press 3 4 to
highlight {PICTURE SETTING}, then press
2.
STANDARD
Select this for standard picture setting.
BRIGHT
Select this will make the TV picture
brighter.
SOFT
Select this will make the TV picture softer.
PERSONAL
Select this to personalise your picture
colour by adjusting the brightness,
contrast, tint and colour (saturation).
2
Press 3 4 to select a setting, then press
OK to confirm your selection.
SYSTEM MENU
31
.
02(A)_8239 300 34302
17/12/2004, 2:03 PM
31