Switching The Yuv/Rgb - Philips DVP3010/02 User Manual

DVD Setup Menu Options
3
If you select {PERSONAL}, then proceed
4 7
to steps ~ .
➜
The 'PERSONAL PICTURE SETUP'
menu appears.
4
Press 3 4 to highlight one of the
following options.
BRIGHTNESS
Increase the value will brighten the
picture or vice versa. Choose zero (0) for
average setting.
CONTRAST
Increase the value will sharpen the picture
or vice versa. Choose zero (0) to balance
the contrast.
TINT
Increase the value will darken the picture
or vice versa. Choose zero (0) for
average setting.
COLOUR
Increase the value will enhance the colour
in your picture or vice versa. Choose zero
(0) to balance the colour.
5
Press 1 2 to adjust the setting that best
suit your personal preference.
6
4 5
Repeat steps ~
colour features.
7
Press OK to confirm.
To return to the previous menu, press 1.
TIPS:
To remove the menu, press
32
01-39 DVP3010_EU_02A_2
1
2
for adjusting other
SYSTEM MENU
32

Switching the YUV/RGB

This setting allows you to toggle the
output of the video signal between RGB
(on scart) and Y Pb Pr (YUV).
In 'VIDEO SETUP PAGE', press 3 4 to
highlight {COMPONENT}, then press 2.
YUV
Select this for Y Pb Pr connection.
RGB
Select this for Scart connection.
Press 3 4 to select a setting, then press
OK to confirm your selection.
Warning:
When the player is set to Y Pb Pr
(YUV), some TV may not properly
synchronise with player on the
SCART connector.
.
02(A)_8239 300 34302
17/12/2004, 2:03 PM