Setting Up Progressive Scan Feature (For Progressive Scan Tv Only) - Philips DVP5900/98 User Manual

Setting up Progressive Scan feature
(for Progressive Scan TV only)
The progressive scan display twice the
number of frames per seconds than
interlaced scanning (ordinary normal TV
system). With nearly double the number
of lines, progressive scan offers higher
picture resolution and quality.
IMPORTANT!
Before enabling the progressive scan
feature, you must ensure:
1) Your TV can accept progressive signals,
a progressive scan TV is required.
2) You have connected the DVD player to
your TV using Y Pb Pr (see page 9.)
1
Turn on your TV.
2
Turn off your TV progressive scan mode
or turn on interlaced mode (refer to
your TV user manual.)
3
Press POWER on the remote control to
turn on the DVD player.
4
Select the correct Video Input channel.
(See page 16).
➜
The DVD background screen appears
on the TV.
5
Press SYSTEM MENU.
6
Press 2 to select {Video}, then press OK
to confirm.
7
Select {Video Output} to {YPbPr}, then
press OK to confirm.
8
Select {Progressive} to {On}, then OK to
confirm.
➜
The below menu will appear on the TV.
TIPS:
To return to the previous menu, press OK.
To remove the menu, press
01-37-DVP5900_AP3
9
Press 1 to highlight
and press OK to confirm.
There will be a distorted picture on
your TV at this state until you turn
on the progressive scan mode on
your TV.
0
Turn on your TV progressive scan mode
(refer to your TV user manual.)
➜
The below menu appears on the TV.
!
Press 1 to highlight
and press OK to confirm.
➜
The set up is complete now and you
can start enjoy the high quality picture.
If no picture:
G
Wait for 15 seconds for auto recovery.
OR
1
Press OPEN CLOSE
system to open the disc tray.
2
Press 2 followed by AUDIO the remote
control.
➜
The DVD background screen will
appear on the TV.
Helpful Hint:
– There are some progressive scan TV and
High-Definition TV sets that are not fully
compatible with this DVD system, resulting in
the unnatural picture when playing back a
DVD VIDEO disc in the progressive scan
mode. In such a case, turn off the
progressive scan feature on both the DVD
system and your TV set.
SYSTEM MENU
17
Getting Started
in the menu
in the menu
0
on the DVD
.
22/09/05, 1:51 PM
17