Connect the power cords of the DVD
player and TV (and any optional stereo or
AV receiver) to a power outlet.
Turn on the TV power and set to the
correct Video In channel. (See page 15
"Setting up the TV").
Press STANDBY-ON to turn on the
The DVD background screen appears
on the TV.
Press OPEN/CLOSE 0 on the front of
the DVD player.
You can also hold down the STOP Ç
button on the remote control to open
and close the disc tray.
Place a disc into the disc tray with the
lable facing up, then press OPEN/CLOSE
For double-sided discs, load the side
you want to play facing up.
Playback may start automatically. If not
press PLAY/PAUSE 2;.
If a disc menu appears on the TV, see
page 21 "Using the Disc Menu".
If the disc is locked by parental control,
you must enter your six-digit password.
(See page 37).
For more playback features, see pages 20–
The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
Basic playback controls
Unless otherwise stated, all operations
described are based on Remote Control
During playback, press PLAY/PAUSE 2;
to pause playback and display a still
Sound will be muted.
To resume normal playback, press
PLAY/PAUSE 2; again.
Press PREV ¡ / NEXT ™ to go to the
previous or next track/chapter.
In STOP mode, press DISPLAY to
display the disc information text line for
title/chapter/track (example - 00/08).
Use alphanumeric keypad (0-9) to
enter valid title/chapter/track number,
then press OK.
The playback skips to the selected
Press STOP Ç.
Screen saver will start automatically if
the disc playback is stopped/paused for 5
The player will automatically switch to
Power Standby mode if you do not press any
buttons for 15 minutes after the disc has
04/07/06, 10:32 AM