Related Manuals for Tentsile T-Mini
Summary of Contents for Tentsile T-Mini
- Page 1 T-Mini O W N E R S M A N U A L It is important that all users read and understand the materials in this manual before any installation and use of the product.
- Page 2 YOU ARE NOW THE PROUD OWNER OF A RI SK OF SE R I OU S INJU RY Tentsile T-Mini A VISUAL AND TACTILE INSPECTION OF YOUR TENTSILE’S FLOOR, STRAPS AND RATCHETS SHOULD BE MADE BEFORE EACH USE. FOR SAFETY REASONS, STRAPS AND RATCHETS SHOULD BE IT IS IMPORTANT THAT ALL USERS READ AND UNDERSTAND THE MATERIALS REPLACED EVERY 2 YEARS.
-
Page 3: Terms Of Use
Introduction Terms of Use The Tentsile T-Mini provides a unique opportunity for you and your friends to Tentsile Tree Tent should be set up only as Tactile and visual checks should be made to experience the great outdoors with a whole new level of freedom and comfort. -
Page 4: Specifications
Specifications Warnings & Disclaimers Installation and use of the Tentsile Tree Tent may great care must be exercised when using it to involve heights, can be dangerous and may lead decrease the risk of injury and/or death. to injury and/or death. - Page 5 Positioning the T-Mini Alignment Tentsile tents need 3 secure and strong anchor points to suspend from. Use the sight tag on the side of the tent. The distances are marked here. Once the location is found, lay out the Look along the tag and ensure it and the strap Tree main Flite+ on the ground as the reference point for the straps.
- Page 6 Tree Straps With a location found, start by wrapping the tree straps around the chosen trees. 2, Once around, thread the 3, Ensure the strap is strap and pull it all through flat against the tree 1, Wrap the loop end of each strap around your chosen trees.
- Page 7 Lay Out the T-Mini Take the T-Mini and lay it out on the ground in the desired location between the choosen trees. Ensure it is the correct way up with the elastic crossed straps facing up. 4, Lay the T-Mini on the...
- Page 8 D-ring. and hold underneath. underneath the straight edge. Rear/Tail: Attach Cow Hitch T-Mini 7, Poke the strap through the 8, Feed this loop underneath D-ring to form a loop that 9, This knot can be released the top strap piece to form Front: will hold the tension.
- Page 9 D-ring to half way. Rear/Tail: Do NOT attach the Ratchet to the Tail End T-Mini 14, Pull it towards the strap 13, Pull it tight securing attached to the tree that Front: it to the D-ring.
- Page 10 With the ratchet strap attached to the D-ring, it can now be connected to the tree strap length. Once attached, check the overall position of the T-Mini and that it is correctly aligned. 17, Feed it in and pull it...
- Page 11 Tightening the Ratchet Cranking the Ratchet will give the tension needed and allows for easy adjustment. Ensure the Ratchet is correctly in the Locked position before T-Mini. 20, Release the ratchet lock 22, Pull the handle back Attention - Ratchet Locking...
- Page 12 Aligning the T-Mini With the T-Mini now raised you must ensure it is correctly aligned with the anchor points. From the centre point of each side the tree straps should line up straight. 25, With the Ratchets now under tension, simple...
- Page 13 2) Thread loop of the ratchet through the D-Ring 7) Roll and tidy up strap ends to avoid any strap, using the buckle every so often. Here is how. at each corner of your Tentsile and take the buckle possible trip hazzards. through the loop.
-
Page 14: The Small Print
Tentsiles should be drops. Do not attach or secure the Tentsile Tree Tent to a stolen, or re-manufactured, and being listed as new. Customer Service Charter stored safely in a dry environment. - Page 15 All rights reserved Tentsile Ltd 2015 Patent Approved...
Need help?
Do you have a question about the T-Mini and is the answer not in the manual?
Questions and answers