Advertisement
User Manual
Introduction
Thank you for purchasing the LINDY DisplayPort 1.2 DP++ Repeater. This DisplayPort Repeater allows
you to transmit DisplayPort signals up to resolutions of 4K@60Hz up to a distance of 10m (30 feet) or at
2560x1600@60Hz or 4K@30Hz up to a distance of 40m (130 feet) using two LINDY GOLD or SLD
DisplayPort cables.
Features
Extends DisplayPort signals up to 40m / 130feet
Supports DisplayPort 1.2 DP++ (Dual Mode), resolutions up to 3840 x 2160 (4K@60Hz) /
2560x1600@60Hz (1600p)
Supports DPCP (DisplayPort Copy Protection), MST, RBR, HBR & HBR2
Support for DP++ / Dual Mode adapters to HDMI/DVI/VGA and mini-DP
Suitable for use with computer, video wall and presentation equipment
Recommended for use with two LINDY GOLD or SLD cables (not included)
Package Contents
LINDY DisplayPort 1.2 DP++ Repeater
Multi-Country Power Adapter (5VDC)
This User Manual
Pre-Installation Remarks
To reach the maximum lengths stated it is required that you use high quality LINDY GOLD cables. For
LINDY Super Long Distance (SLD) cables the maximum length may be slightly reduced. Do not use
standard cables.
Resolutions & maximum cable lengths:
4K@60Hz: up to 10m (5m in / 5m out) with LINDY GOLD cables
4K@30Hz: up to 35m (15m in / 20m out) with LINDY GOLD cables
2560x1600@60Hz: up to 40m (20m in / 20m out) with LINDY GOLD cables
Installation
1.
Plug the supplied power supply to the Repeater and to a corresponding wall socket
2.
Connect a DisplayPort cable to the source DisplayPort socket on your computer and to the input of
the Repeater (marked "Input")
Plug the second DisplayPort cable to the output (marked with "Output") of the Repeater and to the
3.
input of the Display.
Trouble shooting tip: If you are experiencing video problems whilst using two different cable lengths,
please try switching the order in which the cables are installed and then restart your computer.
English
Advertisement
