Connecting The Power Cord; Connecting To Multi-Channel Receiver; Receiver Has A Dolby Digital Decoder - Philips DVP5986K/98 User Manual

Connections

Connecting the power cord

After everything is connected
properly, plug in the AC power cord
to the power outlet.
Never make or change any connections
with the power switched on.
When no disc is loaded, press
STANDBY-ON on the DVD player
front panel.
"NO DISC" may appear on the
display panel.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
12
01-57_dvp5986K_98_eng3.indd 12 01-57_dvp5986K_98_eng3.indd 12
(continued)
DIGITA
TV OUT
OUT
COAX
COMPONENT VIDEO OUT
A
B
C
D
Connecting to a Multi
Channel Receiver
MULTICHANNEL AUDIO IN
FRONT REAR CENTER
FRONT REAR SUBW.
DIGITAL
TV OUT FRONT L REAR L
OUT
COAXIAL FRONT R REAR R
COMPONENT VIDEO OUT
AUDIO OUT
Receiver has a Dolby Digital
decoder
Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your television.
Connect the Audio Out Left and Right
jack for Front and Rear speakers to the
corresponding input jacks on your
receiver (cable not supplied).
Connect the Audio Out for Center
speaker and Subwoofer to the
corresponding inputs on your receiver
(cable not supplied).
Set the DVD player {Analog Output} to
{Multi-channel} to enable playback of
DVDs recorded in Multi-channel. (see
page 38 'Analog output').
Tip:
– If the subwoofer has its own amplifi er,
connect directly to the subwoofer Audio Out
on the DVD Player.
CENTER
SUBWOOFER
2007-06-21 4:51:16 PM 2007-06-21 4:51:16 PM