Connecting A Usb Flash Drive Or Usb Mass Storage Device; Using Usb Port - Philips DVP5986K/98 User Manual

Optional connections
Connecting a USB Flash Drive or
USB mass storage device

Using USB port

You can only view the content of
following supported USB devices through
this DVD player.
A
Connect the supported USB device
directly to the USB port on the front
panel (as shown on the above
illustration).
B
Press USB button on the remote
control in order to view the fi les stored
in the supported USB device.
C
Stop the playback before removing the
supported USB device from the USB
port.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
14
01-57_dvp5986K_98_eng3.indd 14 01-57_dvp5986K_98_eng3.indd 14
(continued)
(Optional accessory - not supplied)
Tips:
– The USB port supports playback of JPEG/
MP3/WMA fi les.
– Not all Portable audio/video players and
Digital cameras are supported.
– While connected to a card reader, only
one card can be read at the same time.
– If non-supported USB device is plugged in,
'Device Not Supported' will be displayed.
– If the USB device does not fi t into the USB
port, a USB extension cable is required.
– The format FAT16, FAT32 can be
supported by USB and not NTFS.
USB extension cable
2007-06-21 4:51:16 PM 2007-06-21 4:51:16 PM