Video Setup Page - Philips DVP3982/37B User Manual

Video Setup Page

HDMI Setup
dvp3962_3982_37_eng1.indd 41
Setup Menu Options
(underlined options are the factory default settings)
It provides the picture settings to enhance the appearance and
picture quality for disc playback. This feature is only applicable if
you have connected this unit to a HDMI-compatible TV/device.
{ Resolution }
Note:
– If the selected resolution is not supported by your HDMI/DVI
TV, a black screen will appear. In this case, wait for 5 seconds for
auto recovery or use the composite (yellow) video cable to
connect this unit and your TV. Turn on your TV to the correct
input channel for the composite video and adjust the resolution
setting to 80p/576p.
{ Wide Screen Format }
– Select a suitable video resolution that is
compatible with your TV display
capability.
{ Auto }
It detects and selects the best
supported video resolution
automatically.
{ 480p, 576p, 720p, 1080i,
1080p (for DVP98) }
Manually select a video resolution. 'p'
for progressive and 'i' for interlaced.
– Select a suitable screen display.
{ 4:3 Pillar Box }
Display the : picture disc on the wide-
screen TV without stretching. Black bars
will be shown on the both sides of the
TV.
{ Super Wide }
Display the : picture disc on the
wide-screen TV with non-linear
stretching (center position of the screen
is stretched less than the side).
{ Off }
No aspect ratio adjustment is made
when this option is selected.
Note: { Super Wide } and
{ : Pillar Box } is only applicable when
this unit's resolution is set to 70p,
1080i or 1080p.
(continued)
1
2008-05-05 2:17:59 PM