Analog Output - Philips DVP3256K/96 User Manual

Setup Menu Options
Audio Setup Page

Analog Output

Digital Audio Setup
6
dvp3256K_96_eng.indd 36
(continued)
(underlined options are the factory default settings)
This setting is only required if you have connected the audio
output of this unit to a stereo device, multi channel audio system
or TV using the analog output jack.
{ LT/RT }
–
{ Stereo }
–
{ V SURR } –
{ Multi Channel } –
This setting is only required if you have connected the audio
output of this unit to an amplifier/receiver using the digital
output jack.
{ Digital Output } –
{ LPCM Output } –
Note: LPCM Output can only be selected when { PCM Only } is
activated. The higher the sampling rate, the better the sound
quality.
The connected device has a built-in
Dolby Pro Logic decoder. It can deliver
the surround sound through the two
speakers.
The connected device can only output
stereo audio through two speakers.
For virtual surround sound effects.
Enable multi-channel output.
{ SPDIF Off }
Disable digital audio output. Select this
if you are using the analog audio jacks
to connect this unit to a TV or Stereo
system.
{ All }
The connected device supports multi-
channel audio formats. The digital audio
format will be output as on disc.
{ PCM Only }
The connected device does not support
multi-channel formats. All audio signals
are downmixed to PCM format
(-channel).
{ 48 K }
Select this to play disc recorded at
sampling rate of 8 kHz.
{ 96 K }
Enable 96 kHz output on digital audio if
the amplifier/receiver is compatible
with high sampling rate audio (88. / 96
kHz). However, if the sound output is
distorted or there is no sound, change
the setting to '8 K'.
2008-03-18 9:02:52 AM