Table of Contents
Advertisement
Audio Setup Page
Speaker Setup
Speaker Setup Page
Front Left
Front Right
Center
Subwoofer
Rear Right
Rear Left
Speaker Setup Page
Center
Subwoofer
Rear Left
Rear Right
CD Upsampling
Night Mode
Setup Menu Options
(underlined options are the factory default settings)
Continued...
{ Speakers Volume }
+6dB
+6dB
+6dB
0dB
+6dB
+6dB
{ Speakers Delay } –
1.0M
1.0M
1.0M
1.0M
Note: Use the longer delay time settings when the rear
speakers are closer to the listener than the front speakers.
This feature enables you to convert the music CD to a
higher sampling rate using sophisticated digital signal
processing for better sound quality. If you have activated
the CD upsampling, this unit automatically switches to
stereo mode.
{ Off }
{ 88.2 kHz (X2) } –
{ 176.4 kHz (X4) } –
Note: CD upsampling is only possible when playback the music
CD in stereo mode.
This mode optimizes playback of sound at low volume. High
volume outputs will be softened and low volume outputs will be
enhanced to an audible level. This feature is only applicable for
DVD video discs with Dolby Digital mode.
{ On }
–
{ Off }
–
–
Use
keys to set the volume level
for individual speakers (-6dB ~ +6dB).
Use
keys to set the delay times
(1m ~ 10 m) based on the listening
position and distance to best suit your
surround needs.
–
Disable CD-upsampling function.
Convert the sampling rate of the CDs
to twice as high as the original rate.
Convert the sampling rate of the CDs
to four times as high as the original
rate.
Turn on night mode.
Turn off night mode. Select this to enjoy the
surround sound with its full dynamic range.
(continued)
43
Advertisement
Table of Contents
