Human Touch HT140 Troubleshooting Manual
Hide thumbs
Also See for HT140:
- Use & care manual (8 pages) ,
- Use & care manual (4 pages) ,
- Use & care manual (24 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Human Touch HT140
Summary of Contents for Human Touch HT140
- Page 1 troubleshooting guide...
- Page 2 May 26, 2009 Please forward any questions or comments regarding this Troubleshooting Guide to documentation@humantouch.com.
-
Page 3: Getting Started
HT-140 Troubleshooting This Troubleshooting Guide walks you step-by-step through the diagnosis of HT-140 customer issues. It is important to follow these steps carefully, to ensure that the problem is diagnosed correctly, and therefore the appropriate repair action is taken. Getting Started 1. - Page 4 To Troubleshoot This Do The Following: Issue: Make sure you are pressing and holding the recline or incline button for at least five seconds; it can take several seconds to My backrest won’t activate the actuator. recline/incline If this does not help, the backrest actuator is not working properly.
- Page 5 IMPORTANT If you replace the backrest, be sure to note the serial number on the backrest cover. Once the backrest is replaced, the chair will no longer contain the serial number. Remote If one or more remote control LEDs do not light when you push the corresponding button, but the function the button controls works properly: The remote control is not working properly.
- Page 6 be corrected by removing the front foot and calf actuator hinge pin, allowing the bracket to swing down into the proper position, then reinstalling the hinge pin. See the Foot and Calf Massager Actuator repair instructions for details. If this procedure does not resolve the problem, replace the foot and calf massager actuator.
- Page 8 Human Touch, LLC 3030 Walnut Ave. Long Beach, CA 90807 humantouch.com...