Table of Contents
Advertisement
3 Connect
Make the following connections to use your
DVD player.
Basic connections:
•
Video
•
Audio
Optional connections:
•
Route audio to other devices:
•
Digital ampliÀ er/receiver
•
Analogue stereo system
Note
•
Refer to the type plate at the back or bottom of the
product for identiÀ cation and supply ratings.
•
Before you make or change any connections, ensure
that all the devices are disconnected from the power
outlet.
Tip
•
Different types of connectors may be used to
connect this product to your TV, depending on
availability and your needs. A comprehensive
interactive guide to help you connect your product is
available at www.connectivityguide.philips.com.
Connect video cables
Connect this DVD player to TV to view disc
play. Select the best video connection that the
TV can support.
•
Option 1: Connect to component video
jacks (for a standard TV or Progressive
Scan TV).
•
Option 2: Connect to scart jack (for a
standard TV).
•
Option 3: Connect to video (CVBS) jack
(for a standard TV).
Note
•
You must connect this DVD player directly to a TV.
Option 1: Connect to component
video jacks
Pb
Y
Pr
COMPONENT VIDEO OUT
1
Connect the component video cables
(not supplied) to the Y Pb Pr jacks on this
DVD player and the component video
input jacks on the TV.
•
If a progressive scan TV is used, you
may turn on the progressive scan
mode.
Tip
•
The component video input jacks on the TV may be
labelled as Y Pb/Cb Pr/Cr or YUV.
•
This type of connection provides good picture
quality.
Pr
Pb
Y
COMPONENT
VIDEO IN
EN
9
- Quick Links:
- Prepare the Remote Control
Hide quick links:
Advertisement
Table of Contents
