Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Kogan Manuals
  4. Garage Door Opener
  5. SMARTERHOME KASHWLGRGDA
  6. Quick start manual

Kogan SMARTERHOME KASHWLGRGDA Quick Start Manual

Wireless
Hide thumbs

Advertisement

Quick Links

Download this manual
SMARTERHOME™ WIRELESS
GARAGE DOOR OPENER
KASHWLGRGDA

Advertisement

loading

Summary of Contents for Kogan SMARTERHOME KASHWLGRGDA

  • Page 1 SMARTERHOME™ WIRELESS GARAGE DOOR OPENER KASHWLGRGDA...
  • Page 2 OVERVIEW The Kogan Smart Wireless Garage Door Opener is a companion to your existing door opener. It allows your door opener to be controlled and monitored with a smartphone or tablet. Confirm the following before installation: 2.4GHz, 802.11b/g/n Wi-Fi Router...
  • Page 3 Components Door Sensor Controller Wi-Fi Indicator Reset Button Cable Wi-Fi Indicator Status Name Function Status Flashing red rapidly. Wi-Fi is not configured in Smart Mode. Flashing red slowly. Wi-Fi is not configured in AP Mode. Wi-Fi is configured but not connected to the Flashing green.
  • Page 4 Button Functions 1. Reset the Device  If the Wi-Fi indicator doesn’t flash red, press and hold the reset button for 3 seconds, it will flash red, this means it was reset successfully.  Resetting will clear the Wi-Fi configuration and door sensor pairing. 2.
  • Page 5 Compatibility Chamberlain or Lift  All models with security+ are not compatible. Master Craftsman  All models with assurance+ 2.0 are not compatible. Genie Compatible models:  Genie Series II openers – best identified by the wall console button(s), which are a non-black colour. This covers the vast majority of Genie openers.
  • Page 6 Checking compatibility by yourself Push Button Terminal #A Terminal #B Take a wire with both ends stripped or a pliers and put each end to the same terminals as the wall button wires are terminated to (Terminal #A and Terminal #B, See the figure above).

  • Page 7: Installation

    INSTALLATION Note: Please power off your garage door opener before installing the device. 1) Connect the cables of the controller to your garage door opener terminals, which should be connected to the wall button. If you have installed a wall button, please twist them together.
  • Page 8 Install the door sensor Stick the sensor on the top flap of your garage door, please make sure that the direction of the sensor is correct. Note: Power on the device and check the controller’s Wi-Fi indicator light after you have installed the door sensor.
  • Page 9 Close or open the door, the Wi-Fi indicator light will be solid green which means it is working now. Operate the door through Smarter Home app for three times again, check the door position in the app. If the steps above failed, please contact Kogan for help.

  • Page 10: App Installation

    APP INSTALLATION Download the “Smarter Home” app from the Play Store (Android) or App Store (iOS). Register If you do not have a “Smarter Home” application’s account, register or sign in with a verification code sent by SMS. To register: Tap to enter registration page.
  • Page 11 Adding the device through network Plug in the device to the socket and power the Kogan Garage Door Opener device on and check that the Wi-Fi indicator is rapidly blinking in red. If not, long-press the Wi-Fi button for 3 seconds to reset the device.
  • Page 12 When device is offline, it displays “Offline” and cannot be remotely powered on.  The garage door opener does not support 5GHz networks, ensure your Wi-Fi is 2.4GHz.  If you can’t add the device to the app successfully, please contact Kogan for help and don’t proceed to the next step.
  • Page 13 More functions of the Application There are two setting options for you to set automated scenes. One option is to add the device to the “condition” list to trigger your other smart devices. Another option is that add the device to the “action” list to be triggered by other conditions.
  • Page 14 Adding the device to “Action” list: Note: Only “Open” and “Close” is valid.
  • Page 15 GOOGLE HOME Note: You will need to have set up a Google Home account prior to linking your Kogan SmarterHome device. In the “Home Control” screen, select the icon to set up device; Select “set up device” to add new device, then select “works with Google”;...
  • Page 16 Click “Done” and then it will give you a list of commands available. When successfully linked, you will see it on your “Home Control” screen at the bottom of the app screen. You can now control your Kogan SmarterHome devices through Google Home.
  • Page 17 Assign Room Update Home Control Voice command “Ok Google, open (---)” OR “Ok Google, close (---)”. If the voice command above doesn’t work, please try “Ok Google, turn on (---)” OR “Ok Google, turn off (---)”. Note: “---” is the device name. It is suggested that you rename the device to a simple but uncommon name.
  • Page 18 ALEXA Note: You will need to have set up an Alexa account prior to linking your Kogan SmarterHome device. Select “Menu” and then “Skills”. Search for the app and enable it. Log into your SmarterHome account with your email address or mobile number.
  • Page 19 Login to App Discover Devices Setup Device...
  • Page 20 This is a Quick Start Guide and while we hope that this has given you the assistance needed for a simple set-up, a full user guide outlining all of this product’s instructions and features can be found online at help.kogan.com...