Philips DVP3386K/93 User Manual page 35

Note
•
If the setting is not compatible with the TV, a blank
screen appears. Wait for 15 seconds for auto
recover or switch to its default mode as follows:
1) Press Z to open the disc compartment.
2) Press numeric button '1'.
• [ Wide Screen Format ]
wide screen format for disc play.
Option Description
[ Superwide ] Center position of the
screen is stretched less
than the side. This
setting is only applicable
if the video resolution is
set to 720p or 1080i/p.
[ 4:3 Pillar No stretching of the
Box ] picture. Black bars are
displayed on both sides
of the screen. This
setting is only applicable
if the video resolution is
set to 720p or 1080i/p.
[ Off ] Picture will be displayed
according to the format
of the disc.
Note
•
This setting is only available if you have set the
Display ] setting to [ 16:9 ].
– deÀ ne the
[ TV
• [ EasyLink Setup ]
is connected to HDMI CEC compliant
TV/devices, all connected devices can
respond to the following commands
simultaneously:
Option Description
[ EasyLink ] Turn off or turn on all
EasyLink features.
•
[ One Touch When you press the
Play] STANDBY button, it
turns on the TV and this
DVD player, then video
disc play starts (if a video
disc is found in the disc
compartment).
•
[ One Touch When you press and
Standby ] hold the STANDBY
button, all connected
HDMI CEC devices
switch to standby mode
simultaneously.
•
Note
•
Philips does not guarantee 100% interoperability
with all HDMI CEC compliant devices.
•
You must turn on the HDMI CEC operations on
the TV/devices before you can enjoy the EasyLink
controls. See the TVs/devices manual for details.
– if this DVD player
To disable this feature,
.
select [ Off ]
To disable this feature,
.
select [ Off ]
To disable this feature,
select [ Off ].
EN 35