Turn on Progressive Scan
Connect a progressive scan TV with
component video jacks (see chapter 'Connect
video cables - Option 2: Connect to
component video jacks' for details).
1
Turn on the TV to the correct viewing
channel for this DVD player.
2
Press SETUP.
3
V
Press
to select [ Video Setup ].
4
Select [ Progressive ] > [ On ], then press
OK.
A warning message is displayed.
Video Setup
TV System
TV Display
Progressive
Picture Setting
HD JPEG
HDMI Setup
5
To proceed, select [ OK ] and press OK.
The progressive setup is complete.
Note
•
If a blank/distorted screen is displayed, wait for 15
seconds for the auto recover.
•
If no picture displayed, turn off the progressive scan
mode as follows:
1) Press Z to open the disc compartment.
2) Press the numeric button '1'.
6
To exit the menu, press SETUP.
On
Off
7
You can now turn on the progressive scan
mode on the TV (see the TV user manual).
Note
•
The progressive scan setting will not be available
when the HDMI video signal is detected.
•
During play, when progressive scan mode is on for
both this DVD player and the TV, distorted picture
may display. Turn off the progressive scan feature on
both this DVD player and the TV.
EN
15