Siemens SIMATIC NET FC FO LC GK1900-1RB00-2AB0 Assembly Instructions Manual page 13

Assembling
FC FO termination kit
A Kevlar scissors
B stripping pliers
C alcohol cloths
D crimping pliers
E fiber container
F cleave tool
1. Cut the cable jacket with stripping pliers (not
supplied).
Note: The length of the stripped piece of cable
should not be less than 200 mm.
4. Cut the fleece (white) and the remaining threads
with the Kevlar scissors (A) as close as possible to
the cable jacket.
5. Cut off the blind elements (gray) and the support
element (white) with the Kevlar scissors (A) as close
as possible to the cable jacket.
13
c b
a dust protection cap
b LC connector
c anti-kink sleeve
2. Pull off the outer jacket.
3. Expose the individual elements.
6. Push on the anti-kink sleeve.
Assembly instructions
FC FO LC Plug
2
a
A5E36312721-AA