Mounting The Octo Av Modulator - Johansson 8180 User Manual

OCTO AV MODULATOR (REF. 8180)
1.3.

Mounting the Octo AV Modulator

• Important: Mount the module vertically to a wall
in a well-ventilated room and leave a minimum
space of 15 cm around the product to guarantee a
maximum ventilation of the product
• Connect an earth wire to the grounding clamp
• Connect the power adapter cord to the power
supply socket. DC power presence is indicated by
flashing dots
• Connect the AV inputs
• Connect a coaxial cable to the output connector
for distribution of the signal
• Connect a network analyser to the test port to control the signal quality
• Configure the Octo AV Modulator using the rotary button, see below
• The power adapter can easily be replaced without disconnecting the product. To do so,
open the top left plastic cover by pushing the click at the opposite side of the mains
connector. See specifications for the type of the power adaptor.
4