3 Connect
Make the following connections to use your
Blu-ray disc player.
Basic connections:
•
Connect to Philips HTR9900 High
Defi nition A/V Receiver (if available)
Or
•
Connect to TV (video/audio)
Optional connections:
•
Route audio to other devices:
•
Multi-channel receiver
•
Digital amplifi er/receiver
•
Analogue stereo system
•
USB device
•
LAN (network)
Note
•
Refer to the type plate at the back or bottom of the
product for identifi cation and supply ratings.
•
Before you make or change any connections, ensure
that all the devices are disconnected from the power
outlet.
Tip
•
Different types of connectors may be used to
connect this product to your TV, depending on
availalbility and your needs. A comprehensive
interactive guide to help you connect your product is
availalble at www.connectivityguide.philips.com.
Warning!
•
Do not place the Blu-ray disc player on top or below
the Receiver/Amplifi er and any other electronic
devices to prevent overheating.
12
EN
Connect to Philips A/V
receiver (HTR9900)
When you connect this Blu-ray disc player to
Philips HTR9900 High Defi nition A/V receiver,
it allows you to enjoy a truly HD cinematic
experience.
Note
•
If this Blu-ray disc player is connected to Philips
HTR9900 or any HDMI supported Receiver/
Amplifi er, additional video and audio connection
from this player to your TV is not required.
COAXIAL
OUT
Blu-ray
1
Connect an HDMI cable to the HDMI
socket on this player and the HDMI
1-Blu-ray IN socket on the Receiver.
2
Connect another HDMI cable (not
supplied) to the HDMI-MONITOR OUT
socket on the Receiver and the HDMI
input socket on the TV.
3
Connect a coaxial cable (not supplied) to
the COAXIAL-IN TV socket on the
Receiver and the COAXIAL/DIGITAL
output socket on the TV.
•
This connection routes the TV audio to
the Philips A/V receiver.
HDMI IN
HDTV
MONITOR OUT
IN
LAN