Step 3: Connecting Tv; Using Av Out Jack; Using The Video Box - Philips MCD288/37B Owner's Manual

Step 3: Connecting TV

IMPORTANT!
– You only need to make one video
connection from the following options,
depending on the capabilities of your TV.
– Connect the DVD system directly to
the TV.

Using AV OUT jack

1
Connect the end of the supplied AV cord with
only one connector to the AV OUT jack of the
DVD system.
2
For the other end, connect the video output
connector (yellow) to the video input jack (or
labeled as A/ V In, CVBS, Composite or
Baseband) on the TV. To hear the sound of this
DVD system through your TV, connect the audio
connectors (white/ red) to the audio input jacks
on the TV.
●
R
●

Using the video box

The supplied video box provides you with more
TV connection options.
First connect the 9-pin connector of the
supplied video box to the CONNECT TO
VIDEO BOX jack on the back of the set by
matching the pins.
Using Composite Video jack
Use a composite video cable (yellow-not
supplied) to connect the VIDEO OUT jack on
the video box to the video input jack (or labeled
as A/ V In, CVBS, Composite or Baseband) on
the TV.
Installation
R
15