Page 1
Laserliner StarFinder Leitungsortung Locating cables Lokaliseren van leidingen Lokalisering af strømførende Holz Metall ledninger Wood Metal Détection de câbles Hout Metaal Localización de Træ Metal cables Bois Métal Localizzazione Madera Metal di cavi elettrici Legno Metallo Lokalizowanie Drewno Metal przewodów...
Page 3
StarFinder Several integrated sensors make the StarFinder from Laserliner to a highly effective detection tool. High functioning safety is ensured by special warning signals. Components 1 Maximum display 2 LE display 3 Mode displays: STUD / CAL / AC 4 Measuring depth switch:...
Page 4
Tip 4: To avoid interference while scanning, keep your free hand and other objects at least 15 cm away from the StarFinder. Tip 5: The StarFinder will only find the outside edge of double studs and headers which may be fitted around doors, windows and corners.
Page 5
• Freshly painted, damp walls. These must have dried for at least one week. 5. AC-SCAN The StarFinder is able to detect the electrical fields of live wires. • Select AC-SCAN (button 6). • Hold the tool in the air so that it is pointing away from any live wires.
Page 6
StarFinder CAUTION: Wires which are at a depth of more than 4 cm may not be detected. Always switch off the power supply when working near electric wires. Tip 1: Depending on surface material electro-static interference may occur when moving unit, LED’s will light up.
Page 7
MeterMaster Pro Laser MultiFinder Pro Art-Nr: 080.930A Art-Nr: 080.960A 110- Volt 10 cm 3 cm 2 cm 4 cm 5 cm 1 cm Stud-Scan Metal-Scan AC-Scan AQua-Master AQM Pro 200 Art-Nr: 029.01.00A...
Need help?
Do you have a question about the Starfinder and is the answer not in the manual?
Questions and answers