Hydraulic Safety - Venture Products Ventrac SS300 Operator's Manual & Parts Drawings

for Ventrac Power Units, Attachments, & Accessories

Hydraulic Safety

• Make sure all hydraulic connections are tight and all hydraulic hoses and tubes are in good condition.
Repair any leaks and replace any damaged or deteriorated hoses or tubes before starting the machine.
• Hydraulic leaks can occur under high pressure. Hydraulic leaks require special care and attention.
• Use a piece of cardboard and a magnifying glass to locate sus-
pected hydraulic leaks.
• Keep body and hands away from pinhole leaks
or nozzles that eject high pressure hydraulic
fluid. Hydraulic fluid escaping under high pres-
sure can penetrate the skin causing serious
injury. If hydraulic fluid is injected into skin, seek
immediate medical attention.
• Hydraulic system may contain stored energy. Before performing maintenance or repairs on the hydrau-
lic system, remove attachments, engage parking brake, disengage weight transfer system (if equipped),
shut off engine, and remove ignition key. To relieve pressure on the auxiliary hydraulic system, shut off
the power unit engine and move the secondary S.D.L.A. lever left and right before disconnecting the
auxiliary hydraulic quick couplers.
• Dispose of all fluids in accordance with local laws.
SAFETY
General Safety Procedures
Safety - 12