Clas Ohlson HU-232CB Instruction Manual

PC-CARD, USB 2.0
Article number: 38-1846, model: HU-232CB
Please read the entire instruction manual before using and save it for
future use. We apologise for any text or photo errors and any chan-
ges of technical data. If you have any questions concerning technical
problems please contact our Customer Service Department.
· USB 2.0 PC-Card adaptor that provides your laptop with two
USB 2.0 ports via a single PC-Card. Each port is capable of the
standard USB 2.0 transfer speed of up to 480 Mbps.
· PC card type II. Easy to install Completely compatible with
USB 1.1.
· Suitable for those lacking USB 2.0 ports on their laptops or those
requiring more.
· Capable of providing an external power supply (adaptor not
included)
· Plug and Play, supported by Windows 98SE/ME/2000/XP/
Installation
This example shows how to install the card with Windows XP
(service pack 2).
· Start your computer.
· Insert the accompanying CD into the CD player.
It will start automatically and the header page
appears. If the header page does not appear,
you can start the CD manually by opening
the CD player in "My computer" and double-
clicking on "U2v2..." to install the driver.
When the installation is complete you will be requested to restart the
computer.
Choose "Yes, I want to restart my computer now", then click
•
on [Close] and let the computer restart.
GREAT BRITAIN For consumer contact, please visit www.clasohlson.co.uk and click on customer service. INTERNET: www.clasohlson.co.uk
ENGLISH
· Insert the card to a vacant
PC card port on the computer.
· Windows will fi nd the card
automatically, check that it is
installed and works:
Click on Start/Settings/Control panel/System/Computer hardware/
Device manager, then choose "USB Enhanced Host controller".
The display will now show "NEC PCI to USB Enhanced Host control-
ler" and "USB 2.0 Root Hub Device" if the card is correctly installed.
External Power Supply
It is possible to power USB devices with high power consumption via
the PC card (adaptor not included). Outputs from the PC card ha-
ving currents of 500 mA or more can cause the connected devices
to experience problems or the computer to freeze.
If you are unsure of the power consumption, you should look in the
instruction manual accompanying the USB device to be used before
connecting it.
· USB devices with low power consumptions such as a computer
mouse, keyboard, scanner or digital camera do not normally
need more than 100mA and can be connected to the USB card
without the need for an external power supply.
· USB devices with high power consumption, such as multi-port
cards, external DVD burners, USB cameras, etc; normally having
power consumptions over 100 mA, can be connected to the USB
card if you connect an external power supply.
An adaptor is not included, so if you buy one it must conform
to the following specifications:
Output: DC 5 V / 1.5 A (to 2 USB ports)
DC adaptor plug (Internal Ø) 1.3 mm* (External Ø) 3.5 mm* (Length)
9.6 mm.
+
Polaritet: (+) in the centre
Plug in the external
power supply
Technical specifications
General Specifications:
Interface: CARDBUS (32-bit), card type II
Power Supply: 3.3V ± 5%
Type: USB Version 2.0, with 2 external USB-ports
Speed: Each port 1.5/12/480 M/bps
Compatibility: Fully compatible with USB 2.0 EHCI and
USB 1.1 OHCI
Maximum number of connected devices: Up to 127 USB devices
Connection: USB-A connection
Size: 114 x 54 x 5mm
Weight: 40 ±1g
External power supply (adaptor not included) DC 5 V / 1.5 A, DC
plug: (Internal Ø) 1.3 mm* (External Ø) 3.5 mm* (Length) 9.6 mm,
(+) in the centre.
Protect the environment
Sort your waste and recycle products instead of throwing
them away. All electronic products, batteries and all
packaging material should be sorted and handled accor-
ding to local environmental regulations.