User Controls
Onscreen Display (OSD) Menus
The projector has multilingual OSD that allow you to make image adjustments and change
a variety of settings.
Using the OSD menus
•
To open the OSD menu, press "MENU" on the remote control.
•
When the OSD is displayed, use the
main menu. After selecting the desired main menu item, press
submenu for feature setting.
•
Use the
using the
•
Select the next item to be adjusted in the submenu and adjust as described
above.
•
Press "BACK" on the remote control, the screen will go back to the
previous menu or exit OSD.
•
Press "MENU" on the remote control to exit OSD directly. The OSD menu
will close and the projector will automatically save the new settings.
Main menu
Sub menu
Note: Some of the following OSD settings may not be available. Please
refer to the actual OSD of your projector.
Note: Functions vary depending on model definition.
keys to select the desired item and adjust the settings by
keys.
keys to select any item in the
Setting
19
to enter
Need help?
Do you have a question about the X1525C and is the answer not in the manual?