Philips DVDR80/051 Quick Install Manual page 2

Manual Home
VIDEO Plus+
Schedule displays programmes for Watch or Record.
Press Bto use. Press the Red button for VIDEO Plus+
recording. Press the Green button for Manual
recording. Press Dfor Search. Press Cfor Info.
Grid Search Schedule Info
No programmes
1
Press MONITOR to view the currently selected input signal on the
screen.
2
Select the programme number from which to record using P+ A or
P- B .
Using P+ A or P- B , select the front sockets ('
sockets ('EXT1', 'EXT2') at the back of the DVD recorder, from which you
wish to record.
Using REC MODE , you can choose between 'M1' (camcorder recordings/1
hour), 'M2' (2 hours), 'M2x' (2,5 hours), 'M3' (3 hours) or 'M4' (4 hours) ,
'M6' (6 hours) or 'M8' (8 hours).
Normally, a recording always begins at the position where the previous
recording ended. All subsequent recordings will be erased.
If you want the new recordig to be made at the end of all the other
recordings, hold down REC/OTR n until '
3
Press RECORD or REC/OTR n to start the recording.
a
b Check whether the cable connectors are properly inserted.
b If the recording is to be made from a video recorder, change the 'tracking'
setting on the video recorder.
b In case of bad or non-standard video input signals, the DVD recorder may
be unable to detect the signal.
Programmed recordings will not work, until the installation of the GUIDE Plus
complete.
1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
2
Press TIMER s on the remote control and then press the green
function button to set a manual timer.
3
Enter the data of the recording using the number buttons 0..9 , or
P- B , P+ A , D , C . Confirm the entry with OK .
4
Complete the programming by confirming the TV channel (programme
number).
5
To end, press TIMER s .
6
Switch off the DVD recorder using STANDBY m .
A programmed recording functions only if the DVD recorder has been
switched off using STANDBY m .
', ' ') or the
' appears on the display.
® system is