Troubleshooting; Specifi Cations - Panasonic NR-BT268 Operating Instructions Manual

Table of Contents

Advertisement

Appendix

Troubleshooting

In these cases?
The refrigerator does not
operate.
The refrigerator does not
cool enough.
Vapor generated inside and
outside the cabinet / surface
of door.
The refrigerator generates
noise.
Food becomes frozen
Specifi cations
Model No.
Freezer Star Rating
Total
Capacity (L)
Gross/Storage
Freezer
(IEC 62552)
Refrigerator
Outside Dimensions
Width x Depth x Height (mm)
Refrigerant Type
Net Weight (kg/lb)
Cooling System
Rated Voltage (V)
Rated Frequency (Hz)
Panasonic Corporation
Website: http://www.panasonic.com
© Panasonic Appliances (Thailand) Co., Ltd. 2019
16
ARAH0A106850_EN.indd 16
ARAH0A106850_EN.indd 16
Check that the plug and wall socket are in good condition.
Check if there is any problem with the mains fuse or house wiring.
Check by unplugging for 5 minutes and plugging back in.
Check to be sure that light in control panel is display at proper position
(P.10)
Check to ensure that the refrigerator is not overloaded with foodstuffs
or that hot food have been placed in the refrigerator.
Is the refrigerator exposed to direct sunlight or a heat source?
Is the refrigerator door completely closed?
Is the refrigerator door opened frequently?
Condensation may appear on the surface of the cabinet when
humidity is high or air circulation around the unit is poor.
If there is condensation inside, check if the door is completely closed.
Is the refrigerator frequently opened or left open for a long time?
Have any hot foodstuffs been placed inside the refrigerator?
Check if the refrigerator is located on a stable, level fl oor and is
installed correctly. Use the adjuster bolt if required to level the
refrigerator. (P.8)
Check if there is any object in contact with the refrigerator.
Cracking sound within caused by the parts adjusting temperature
which is normal.
After installation, the refrigerator may make loud noise.
The noise will be less when the refrigerator has been cooled.
Was the food placed near the cold air duct?
If the temperature control has been set to "3" (Max) try adjusting the
temperature control to the "1" (Min) setting.
Refer to the rating label attached at the door or the back of the cabinet.
Introduction
Check here.
NR-BT268
263/221
67/42
196/179
550 x 600 x 1580
R600a
46/101
Non-frost cooling.
10/1/2562 BE 10:48
10/1/2562 BE 10:48

Advertisement

Table of Contents
loading

Table of Contents