GERATHERM Active Control+ GT-1115 Manual page 45

Preparation for use
Notes
If you switch on the blood pressure monitor and the LCD
display flashes "
is low. Please recharge it.
You can, however, still carry out the measurement.
If the LCD display "
battery charge is too low. The blood pressure monitor will
switch off automatically and you must recharge it imme-
diately.
During recharging, the LCD display flashes and shows
the following symbols:
If it is not charged at all, the
following symbols appear on the
LCD display during charging:
If charge level 2 has been
reached, the following symbol ap-
pears on the LCD display during
charging:
". This means that the battery charge
" appears, this means that the
If charge level 1 has been
reached, the following symbols
appear on the LCD display during
charging:
If charge level 3 has been
reached, the following symbol ap-
pears on the LCD display during
charging:
45
EN