Advertisement
1
Connect
A
Placement
Proper speakers system placement is important to
ensure optimum sound performance.
A
Place the centre speaker above or close to the TV.
B
Place the subwoofer on the floor, at least one metre
away from the TV.
C
Place the front speakers at equal distances from the
TV.
D
Place the rear speakers at the back or beside the
listening position.
htr3464_12_qsg_eng2_final812.ind2 2
htr3464_12_qsg_eng2_final812.ind2 2
B
Connect the speakers and subwoofer
Connect the various coloured plugs from the speakers
and subwoofer to the same coloured sockets at the rear
of the main unit.
FRONT CENTER
SUBWOOFER
FRONT
FRONT
REAR
REAR
RIGHT
LEFT
RIGHT
LEFT
Main Unit (rear)
C
Connect the radio antenna and
power cable
Keep the antennas away from the electronic devices to
prevent unwanted interference.
A
B
FM antenna
Main Unit (rear)
A
Connect the FM antenna (supplied) to the inner pin
of the FM 75
socket. (For some models, it has
been connected in the factory.) Extend the wire for
optimum reception.
B
Connect the power cable from the main unit to the
AC power outlet.
D
Connect the audio from audio/video
devices
(TV, DVD Player, Recorder, Cable/
Satellite Receiver or Game Console) (optional)
Option 1: Using the analogue audio sockets
(Connect audio output from TV)
To hear the TV audio through this unit, use a red and
white audio cables (supplied) to connect the AUDIO IN-
AUX sockets on the main unit to the AUDIO OUT
sockets on your TV.
AUDIO
OUT
TV (rear)
AUDIO OUT
AUDIO
OUT
AUDIO IN
Main Unit (rear)
Note When watching the TV programs, you can
press DI/AUX repeatedly on the remote control until
'AUX 1' or 'AUX 2' is displayed to get the sound
output from the speakers.
Option 2: Using the analogue audio sockets
(Connect audio output from other device)
Connect a red and white audio cables (supplied) to
connect the AUDIO IN-AUX sockets on the main unit
to the AUDIO OUT sockets on the connected device
(for example, DVD recorder, VCR, Cable/Satellite Box).
AUDIO
OUT
AUDIO OUT
DVD recorder/ VCR/
Cable/ Satellite Box
Main Unit (rear)
Note Press DI/AUX repeatedly on the remote
control until 'AUX 1' or 'AUX 2' is displayed as the
source you want to listen to.
Option 3: Using the Coaxial In socket
Connect a coaxial cable (supplied) from the
DIGITAL IN-COAXIAL socket on the main unit to the
COAXIAL OUT sockets on the other device.
Audio/ Video device (rear)
Main Unit (rear)
Note Start playback on the device. Press DI/AUX
repeatedly on the remote control until 'COAX IN1' or
'COAX IN2' is displayed as the source you want to listen
to.
Option 4: Using the Optical In socket
Connect an optical cable (not supplied) from the
DIGITAL IN-OPTICAL sockets on the main unit to the
OPTICAL OUT sockets on the other device.
Audio/ Video device (rear)
Main Unit (rear)
Note Start playback on the device. Press DI/AUX
repeatedly on the remote control until 'OPTI IN' is
displayed as the source you want to listen to.
2008-03-19 3:53:25 PM
2008-03-19 3:53:25 PM
Advertisement
