TUFLOC TufBox Installation Instructions Manual

Chevrolet caprice car storage box

Advertisement

Quick Links

INSTALLATION INSTRUCTIONS

Chevrolet Caprice TufBox
Warranty
Thank you for purchasing the TufBox manufactured by TUFLOC. We have worked hard to develop the
best storage box on the market and warrant this product for one year from date of purchase against
defects in materials and workmanship. This warranty is limited to replacement or repair of the product
only. No other warranties are expressed or implied. Please contact the factory for warranty claims before
returning any product.
1-800-321-0870 • 330-452-9132 • Fax 330-452-2557
1406 Fifth Street, SW • Canton, Ohio 44702 • USA
info@esmet.com • Tufloc.com
6/18

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TufBox and is the answer not in the manual?

Questions and answers

Summary of Contents for TUFLOC TufBox

  • Page 1: Installation Instructions

    Chevrolet Caprice TufBox Warranty Thank you for purchasing the TufBox manufactured by TUFLOC. We have worked hard to develop the best storage box on the market and warrant this product for one year from date of purchase against defects in materials and workmanship. This warranty is limited to replacement or repair of the product only.
  • Page 2: Completed Assembly

    Insert Bolt will need to be tightened until the Insert has fully expanded. Completed Assembly • Once expanded unscrew Insert Bolt from Insert. 1-800-321-0870 • 330-452-9132 • Fax 330-452-2557 1406 Fifth Street, SW • Canton, Ohio 44702 • USA info@esmet.com • Tufloc.com...
  • Page 3 (See detail below) • It may be necessary to remove contents that are stored in or around the mounting footprint of the TufBox as these components may not be accessible after installation.
  • Page 4 Secure the Uprights to the TufBox • Using two Hex Head Bolts on each side, mount the right and left uprights to the TufBox (See diagram below). Slide this assembly all the way to the back of the trunk. Secure the TufBox to Vehicle •...
  • Page 5 Secure the TufBox to Floor • Locate the holes on the bottom of the uprights and use the holes closest to the front of the trunk compartment, nearest to the brake lights to mount the self-tapping screws to the trunk floor. Because of the gas tank location, wiring, hoses, etc, it is recommended that there be no additional drilling in the mounting zones.
  • Page 6 • The TufBox is designed to provide years of reliable service with minimal maintenance. Occasionally, coat the key with a light petroleum-based lubricant such as WD-40 and insert the key into the lock & turn a few times to lubricate the lock cylinder.

Table of Contents