Samsung WA5471AB Series Service Manual page 18

Clutch Assembly
(continued)
16 _ Disassembly and Reassembly
Downloaded from Hudson Washer.indb 16 www.Manualslib.com
Part
manuals search engine
Figure
6. Remove the shaft with the jig wrench.
- Release the nut in a clockwise direction.
- Fasten the nut in a counterclockwise
7. Place the main body so that the front
8. Remove the bolt holding the DD-motor
9. Remove the 6 bolts holding the DD-
Description
direction.
frame faces upward and remove the 2
bolts holding the saddle with a 10mm
wrench.
When you place the washer on
the floor, take care that you do not
damage or scratch the product.
housing with a 17mm wrench and then
remove the motor housing.
motor with a 10mm wrench.
2012-03-28 9:45:54