Table of Contents
Advertisement
Initial Installation
With a OneRemote RMB4 converter installed in your Bang & Olufsen Beo4 remote control
terminal you may also control a Sony TV with that terminal. You may still operate Bang & Olufsen
devices.
The RMB4 Factory setting will fit most users, making it possible to fully control an Sony TV as
with its original Sony remote control.
This manual covers special installations where further integration is needed. Maybe setups
including other Bang & Olufsen devices or even.
To alter the behaviour of the way the OneRemote modified Remote Control operates, one or
more so called Options must be entered.
Options – Optimizing the installation
An option is set simply by entering the key sequences shown in the tables. At any time, simply
enter the 7-key sequence in the modified Beo4 remote control. The function will immediately
take effect.
Some Options may require entering two separate Options. An example could be when control of
both a connected Set Top Box i.e. an Apple TV and the Sony TV is needed. Here the RMB4
converter needs to have two Options set:
1. Which Source key on Beo4 is used to activate control of the set top box i.e.
2. Which Socket on the TV must be opened, when pressing this Source key?
Any Option can be altered at any time. An Option is available to reset all Options to factory
default settings.
Options -Acknowledge
Entering an option is straight forward, but if an acknowledge is needed, it can be achieved setting the Sony
TV in TV mode, before entering the Option.
After entering an Option, the RMB4 converter will send a status to the TV, making it change Channel.
TV receives a '0':
TV receives a '1':
TV receives a '3':
www.oneremote.dk
An error has occurred; the Option has not been recognized or saved properly.
An Option has been saved correctly.
The OneRemote RMB4 converter has been factory reset.
d
3
Advertisement
Table of Contents
