Ivation IVANSICE05 User Manual page 5

Problem
"Add Water"
indicator
illuminates.
"Ice Full"
indicator
illuminates.
Ice cubes stick
together.
The ice making
cycle seems
normal but no
ice is made.
"Add Water"
and "Ice Full"
indicator are
both blinking.
Possible Causes
The water reservoir
is almost or
completely empty.
The ice bucket is
full.
Ice making cycle is
too long.
Water temperature
in the water
reservoir is too low.
Ambient
temperature or
water temperature
in the water
reservoir is too high.
There is refrigerant
leakage.
Pipe in the cooling
system is blocked.
Ice is stuck in the
ice making box.
Mechanical failure
Components may
be damaged
Add water not exceeding
the water full mark and the
ice maker will re-start
automatically.
Remove ice from ice storage
bucket.
Press the power button to
turn off the unit, then press
it again to turn on the unit.
Select the SMALL ice size.
Replace water in the water
reservoir. Water
temperature between 45°F
and 90°F is recommended.
Operate the ice maker in
room temperature below
90°F. Water temperature
between 45°F and 90°F is
recommended.
Call an authorized technician
to repair.
Call an authorized technician
to repair.
Press the power button to
turn off the unit. Remove the
ice cubes in the ice making
box. Press Power button
again to restart.
If both indicators remain
blinking after removing ice
cubes and restarting, unplug
the ice maker for 2 minutes
and plug in the unit again.
Call an authorized technician
to repair.
5
Solution