Care And Maintenance; Troubleshooting - Ivation IVANSICE05 User Manual

4. Replace the ice bucket and close the front cover.
5. Press the power button to the ON position. The "L" light will illuminate, then the ice making
process will begin.
Notes:
• As soon as the ice bucket is full, the ICE FULL indicator on the control panel will illuminate and
the ice maker will stop automatically. Ice production resumes once ice has been removed from
the bucket.
• If there is not enough water in the ice maker, the ADD WATER indicator will illuminate and ice
maker will stop operation. Add more water, then press the power switch to the ON position to
start the machine.
• If any error or failure occurs, the ADD WATER and ICE FULL indicators will flash together and
ice production will stop. Please refer to Troubleshooting page of this user guide.
• Switch off the ice maker and disconnect it from the power supply when not in use.
• If the unit is powered off for any reason, wait at least 5 minutes before powering it back on.
This is to protect the compressor.

Care and Maintenance

Periodic cleaning and proper maintenance will ensure efficiency, performance, and extend unit's
life span.
• Always turn off and disconnect power supply before cleaning.
• Never use solvent-based cleaning agents, which may leave harmful residues.
• DO NOT wash the main unit, instead wipe the exterior with a damp cloth.
• Dry the interior and exterior with a soft cloth.
• Check the drain plug regularly for leaks.
• If there is a strange taste, the ice maker must be cleaned.
• After cleaning, run the ice maker two times before using the ice.

Troubleshooting

If the unit appears to be malfunctioning, wait for the unit to stop automatically. The issue may be
solved by referring to the table below. However, do not open to check or repair the unit unless
instructed to do so.
Note:
The "L" light keeps flash when unit is powered on, this will happen when the compressor is running.
The ice maker has a self-checking feature. Any error will be displayed in the control panel with
"ADD WATER" and "ICE FULL" lights flashing together.
Problem
The unit does
not operate.
Possible Causes
Power is not being
supplied.
A household fuse or
circuit breaker has
been tripped.
The detachable
power cord is not
connected properly.
Check your local power
source.
Make sure the power cord is
connected firmly to the unit
and plugged correctly into
the power outlet.
4
Solution