Introduction The EdenPURE GEN40 comes equipped with easy, touch button ® operation on the unit, as well as a remote control. It puts out a lot of air, while running quietly. It has a tip-over switch, which shuts the unit off if it were to tip over. The GEN40 can be set to oscil- late to provide heating/cooling over a wide area.
Control Panel Remote Control Light red light - High heat Dark red light - Low heat Blue light - Fan No light - Off Indicator light Handle Dust Screen Remote Control Place Turnplate Base Plug Instructions On/Off Please check to make sure all parts are intact before use. Press the on/off switch on the base of the unit.
If you want the unit to oscillate, touch and hold the “ ” button on the unit for 2 seconds or touch the “ ” button on the remote. The unit will then oscillate left and right. To turn the oscillation off, touch and hold the “...
Make sure the unit is placed on a flat stable surface. Don’t use the unit in a flammable environment. Keep it away from flammable objects. The protection grill is used to separate the thermal unit from the user. If the protection grill is damaged, contact the manufacturer to have it replaced.
Need help?
Do you have a question about the GEN40 A5956 and is the answer not in the manual?
Questions and answers