Connect And Set Up; Connect Speakers - Philips HTS2511/98 Quick Start Manual

ZOOM
o
Zoom into a video scene or picture. Press
the Navigation buttons (left/right) to select a
zoom factor.
SCREEN FIT
p
Fit the picture format to the TV screen.
SUBTITLE
q
Select subtitle language for video.
AUDIO SYNC
r
•
Select an audio language or channel.
•
Press and hold to access audio delay
setting, and then press the +/- or
Navigation buttons to delay the audio to
match the video.
SURR
s
Select surround sound or stereo sound.
( Stop )
t
•
Stop play.
•
In radio mode, press and hold to erase
the current preset radio stations.
( Play/Pause )
u
Start, pause or resume play.
OPTIONS
v
Access more play options while playing a disc
or a USB storage device.
OPEN/CLOSE
w
Open or close the disc compartment, or
eject the disc.
SLEEP
x
Switch the home theater to standby mode
after the elapsed time.
EN
6
3

Connect and set up

This section helps you connect your home theater
to a TV and other devices, and then set it up.
For information about the basic connections of
your home theater and accessories, see the quick
start guide. For a comprehensive interactive guide,
visit www.connectivityguide.philips.com.
Note
•
For identifi cation and supply ratings, see the type
plate at the back or bottom of the product.
•
Before you make or change any connections,
make sure that all devices are disconnected from
the power outlet.

Connect speakers

The speaker cables are color-coded for easy
connection. To connect a speaker to your home
theater, match the color on the speaker cable to
the color on the connector.
Speaker position plays a critical role in setting up
a surround sound effect. For best effect, position
all the speakers towards the seating position and
place them close to your ear level (seated).