Advertisement
1L360R
OPERATING INSTRUCTIONS cont.
TM
Pulse Mode
Pulse mode allows the 1L360R to be used with the LLR705 line receiver and
so allowing the laser to be used outside for general site levelling, patios,
decking etc.
With the 1L360R, pulse mode is automatically enable when powered up.
For maximum visible brightness indoors disable the pulse mode by pressing
the pulse "P" button, the LED above will go out. Disabling pulse mode will
give a brighter visible line but a receiver will no longer operate until pulse
is re-enabled. To re-enable pulse press the pulse "P" button once more.
8
Advertisement
