Audio Settings; Parental Control Settings; Display Settings; Energy Saving Settings - Philips HTS3582/98 User Manual

•
[HDMI video] : Select the resolution of
video signal that is output from HDMI OUT
(ARC) on your home theater. To enjoy the
selected resolution, make sure that your TV
supports the selected resolution.
•
[HDMI Deep Color] : Recreate the natural
world on your TV screen by displaying
vivid images using billion colors. Your home
theater must be connected to a Deep
Color enabled TV through an HDMI cable.
•
[Picture settings] : Select pre defi ned
color settings for the video display.
• [Watch 3D video] : Set HDMI video to
support 3D or 2D video.
Note
•
If you change a setting, make sure that the TV
supports the new setting.

Audio settings

1
Press ( Home ).
2
Select [Setup] , and then press OK .
3
Select [Audio] , and then press OK .
4
Press the Navigation buttons and OK to
select and change:
• [Night mode] : For quiet listening,
decrease the volume of loud sounds on
your home theater. Night mode is only
available in DVDs and Blu-ray discs with
Dolby Digital, Dolby Digital Plus, and
Dolby True HD soundtracks.
• [HDMI Audio] : Set the HDMI audio
output from your TV, or disable HDMI
audio output from the TV.

Parental control settings

1
( Home ).
Press
2
Select [Setup] , and then press OK .
3
Select [Preference] , and then press OK .
4
Press the Navigation buttons and OK to
select and change:
•
[Change Password] : Set or change your
password for parental control access.
If you do not have a password or have
forgotten your password, enter 0000 .
•
[Parental control] : Restrict access to
discs that are recorded with age ratings.
To play all discs, irrespective of the ratings,
select 8 or [Off] .

Display settings

1
Press ( Home ).
2
Select [Setup] , and then press OK .
3
Select [Preference] , and then press OK .
4
Press the Navigation buttons and OK to
select and change:
• [Auto subtitle shift] : Enable or disable
automatic repositioning of subtitles on
TVs that support this feature.
• [Display panel] : Set the brightness of the
home theater front panel display.
• [VCD PBC] : Enable or disable the content
menu navigation of VCD and SVCD discs
with Play Back Control feature.

Energy saving settings

1
Press ( Home ).
2
Select [Setup] , and then press OK .
3
Select [Preference] , and then press OK .
4
Press the Navigation buttons and OK to
select and change:
• [Screen saver] : Switch the home theater
to screen saver mode after 10 minutes
of inactivity.
•
[Auto standby] : Switch the home theater
to standby after 30 minutes of inactivity.
This timer works only when a disc or
USB play is paused or stopped.
• [Sleep timer] : Set the duration of the sleep
timer so that the home theater is switched
to standby after the specifi ed period.
EN 19