Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Naked NKD1
Summary of Contents for Naked NKD1
- Page 1 Installation and Setup Guide...
-
Page 2: Import Ant Warnings & Safety Instructions
The product shall be installed according to AS/NZS 3000 wiring rules. It shall be installed outside the pool zone. Please contact Naked Pools on 1300 625 331 for further assistance. -
Page 3: General Overview
While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. Naked Pools Pty Ltd reserves the right to change the speci cations of the hardware and software described herein at any time without prior notice. - Page 4 CONTROL UNIT HOUSING WITH UNIONS BRACKET CARD 2X50/40 2X Green Wall The Installation Redusing Bushes Plugs with Screws & Operating Manual 2.3 Tools Needed BASIC PVC FITTINGS PVC PRIMER AND GLUE NO.2 PHILIPS HEAD SCREWDRIVER DRILL WITH 6MM HACKSAW www.naked-pools.com...
-
Page 5: Pool Preparation
• Running the pump will mix the water and help the salt/minerals to dissolve. When taking your pool water to a pool shop for testing please ensure you take the enclosed laminated NKD1 System Card to ensure your water is tested correctly and accurate results are achieved. See handy tips 8.0 WATER CHEMISTRY. -
Page 6: Installation Diagram
TO POOL 4.2 Control Unit Installation • The NKD1 Control Unit has an Ingress Protection Rating of IP23 enabling it to be installed outdoors. Regulations require that the Control Unit shall be installed outside the pool zone. The Control Unit shall be installed according to AS/NZS 3000 wiring rules. - Page 7 4. NKD1 SYSTEM INST ALLATION 4.3 OXI/Housing Installation • Connect the Housing horizontally in the return line to the pool (use reducing bushes supplied if 40mm PVC pipe) using high pressure PVC glue. The Housing can be mounted vertically but provision must be made for a gas trap.
- Page 8 5. ST ARTING YOUR NKD1 FRESH WATER SYSTEM 5.1 Switching on the Unit When switching on the NKD1 Fresh Water System for the rst time the screen to the right will be displayed. 5.2 Start Up Clock Set START UP CLOCK SET allows you to program the exact time of the day.
-
Page 9: Start Up Information
A reading of 40,000Lt or similar ashes to show it can be changed. Pressing [OK] con rms your selection. If you do not know your pool size you can press [OK] and set this later or visit www.naked-pools.com or call 1800 NAKED1 (625 331) for further information.