In accordance with the German BGV A3 electrical equipment has to be examined in regular inter- vals. Detergents which contain highly flammable substances must not be used. Use only detergents ap- proved by DENIOS for this unit. 2. Technical data Dimensions...
If such damage is found, do not connect the unit to the mains. Report damage immediately to the carrier who delivered the unit and to DENIOS AG at the service number indicated above. The original packaging should be kept.
The washstand is equipped with two filters as standard. A stainless steel perforated filter on the washstand surface and a synthetic filter for impurities underneath. It is recommended to clean these filters on a daily basis. To do so, remove the filters from the unit and rinse with water. bio.x B200 Page 6 of 12 01/2010...
Page 7
Cleaning fluid bio.x 200-litre drum 161524 Replacement parts (see also product description page 4) Description Item number Filter insert for fine filter (optional) 150043 Central support bracket and nylon filter bio.x B200 Page 7 of 12 01/2010 172236, 172292, 176074...
According to the electronic and electrical appliance regulations, owners of disused appliances are legally required to dispose of such items separately. Please help to protect the environment by not disposing of disused appliances with household waste. bio.x B200 Page 8 of 12 01/2010...
To check the fuses the technical components (Item 8) can be removed completely from the appliance after pulling the hose from the ball valve and loosening the tapping screws. If you have a more complex fault please contact our service technician. bio.x B200 Page 9 of 12 01/2010...
11. EC Declaration of Conformity EC Declaration of Conformity Herewith we, the DENIOS AG, Dehmer Straße 58-66, D 32549 Bad Oeynhausen, declare that the parts cleaner B 200 complies with following guidelines: EC Directives 2006/42/EC 2004/108/EC Harmonised standards applied EN 349...
Need help?
Do you have a question about the BIO.X B200 and is the answer not in the manual?
Questions and answers
what is fault code f1?